Got these from Khaos and loved the light output but not so much on the bulkiness of the lights themselves. Decided to go to cleared stocks and now selling these.
TYC Denali housings with Morimoto H1 projectors retrofitted in. 5k bulbs with digital ballasts.
The vertical adjuster is loose on...
All parts are OEM and taken off my 2013 Silverado 2500HD with 4-5k miles. Putting them on here before Ebay!
Located in Ottumwa IA.
Factory chrome bumper pieces, $70 each or $130 for the pair shipped to the lower 48.
Fog lights sold.
Was killing time after work trying to go to sleep and decided to do the front end of my truck. Needs a few more coats but it's whatever for now. Just wanted to see it before I bought painted stuff. Was all chrome
Sent from my iPhone using Tapatalk
I will start off by answering the basic ?'s Here's my setup.....
1) 6K Hid's (they are just a "house" brand from a company I deal with at work. Probably comparable to DDM. I have sold many of these kits to others and used many sets myself with no issues)
2) ********hids relay harness...
Im looking for people opinions on where they have put switches in their NBS trucks. My light bar shows up today and I have no clue where to put the switch for it. Just as an FYI, I cant do next to the gauges, 4x4, fog and cargo light switches are there, the airbag switch is a cubby in my truck...
Im Tyler Burnett (16) new from west monroe! My buddy Alex Best talked me in to joining. I have a 04 gmc sierra, 6" with 35" trail graps on 18"moto 962, debadged, hids and all leds,20" light bar on front bumper, cleared lights, and hydro dipped interior parts.
black
cheeky
chevy
cleaning
clear
console
fog
gmc
grill
interior
led
mirrors
names
paint
post
shreveport
sierra
silverado
stock
trans
truck
tune
wheels
word
z71
Took me 6 years but finally got a lift on my Tahoe! Installed a 6" RCX that I picked up from MPC, 5160 Bilsteins all the way around, a Mag-hytec diff cover, 20x12 Ion Alloy 183s on 305/55 trail grapplers. Did the lift in a matte silver, as well as the stock lower arms (front and rear) didn't...
So, as some of you may know, I wrecked my truck almost a couple weeks ago, and I recently had it taken to the shop to be repaired, but I really don't like the shops attitude about fixing the truck, so if the insurance will let it happen, my plans are to bring the truck back to a local garage and...
Making a build thread for my Jeep. Brett doesn't like it, other might or might not :idgaf: it really is one of the funnest vehicles I've had.
Stock specs for those that aren't familiar with them are
2005 Jeep Wrangler Rubicon
4.0 I6
NSG-370 6 speed manual, 4.46 1st gear
NV241 Rock-Trac tcase...
Chrome non fog light caps in perfect shape and non fog light light switch. $100 for caps plus shipping and $50 for switch plus shipping. Will sell together for $125 plus shipping. New Orleans area. Will meet with reasonable distance too.
feeler to see what interest there may be for some smoked OEM denali headlights and marker lights. Smoked at local body shop not that vht paint. Cleared and ready to go. Have factory projectors in them and also have another set of projectors with Osram D1S bulbs in them, no wiring just bulbs...
I want to candy the tails on my Suburban. I purchased a can of VHT tail light candy paint. I've been hearing mixed things about it. I've heard people say that this stuff is garbage. And others claim it works great. Im wondering if the people with problems applied it worng or didnt prep...
I recently picked up an LQ9 for my bodied silverado.
Didn't come with the 3 piece covers. Decided I was going to order a set for the LQ9.
Started thinking about it and I'm considering buying another set for my sisters truck to clean up the engine bay a little.
Will the vortec 6000 covers bolt...
2011 chevy silverado lt all-star edition 2wd crew cab
19000 miles 5.3, auto, locking rear diff. towing package
motor is stock not even a CAI, mobile 1 synthetic every 3000 miles
msrp was $35000 easy $10000 extra in it
bluetooth steering wheel radio controls
Onyx black with black leather...
Hey guys I'm Thomas from the great state of Texas. Got my invite through the Instagram page. I have a 2011 Silverado crewcab with the 6.2L. Truck has belltech 4/6 lowering kit and sway bar, 2011 hd conversion, 6k hids low and fog lights, 2008 Texas edition 20's, vararam intake, magnaflow muffler...
I was wondering if anyone knows where I can order a set of clear corner/turn signals for a 1999-2000 escalade. I have tried to places and both say they are on back order. So what I was also wondering was can you clear a set of OEM ones and remove the orange lens. Is it similar to the NBS where...
I figured I would go ahead and post my story, my very slow build because no monies, and my plans, since I'm still relatively new here.
Traded for the truck used in February 2012 with 21k miles on it.
-5.3 with GayFM :facepalm:
-Victory Red 1500
-4x4 with Z71 and LT package
(Tires are and will...
Anyone preferred for doing renderings?
Right now I'm looking at going through Busted Knuckles Design and Fabrication. They're charging $150 for a two panel rendering (front view and rear view)
Here's some of their work.
Anyone have someone better for the same price, or better for cheaper?
I have a few parts off of my truck for sale:
Front fog light valence, center cut out for grille/light bar $75
Grille shell $50
Billet grille $75 with hardware
Billet grille lower $50 with hardware
I'll also trade everything for a Denali lower grille
Sent using Tapatalk
Wassup all! Cheeny23 told me about the forum. I have a forum dedicated to the Chevy Colorado and GMC Canyon trucks. Maybe we can combine forces and get our NorCal members together for a meet to show off our trucks someday!
Here's a few images of my truck
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.