wheels

Ok guys I'm new here and need some help. I've got a 2011 Chevy Silverado crew cab that I'm wanting to lower around 4/6 and trying to avoid notching the frame. I've seen several different kits and lots of forums on this subject but they're all a few years old. I'm looking for more up to date info...

I have a set of Z71 18's with 15k miles in great condition. Just looking to see what they are worth wanting to put fuel maverick 20's on my truck. Located in prosper, tx.

Had this truck since my sophomore year. Always wanted to ls swap it now I'm getting around to it. Was originally going to be a lq9 that I was getting in return for doing a cam swap, and help with an ls swap. Motor ended up having water in it. So I got it and $1200. Have a set of cnc'd 317's...

Since some folks might be interested in what the LS3s are performance at. Finally decided to go with the Whipple for the Chevy SS. So off to the shop she goes: On the Mainline hub dyno for stock vs AirAid vs Whipple numbers: - - - - - - - - - -auto merged double post- - - - - - - - -...

As most know I bought 22s last night. Wife wont let me keep them so they gotta go. New 275/45s (800 miles) New sensors Powdered metallic silver has oe gmc caps All done last month. North Louisiana I have right at 900 in them all together. Cgm hook up 700 obo

SOLD: Austin Texas. 20x8 Centerline Sniper SOLD... Figure I'll give this a try here to see if anyone is interested. Selling my centerline sniper 20x8 wheels. According to the centerlines website they have a 5" backspace or +12 offset. These are great wheels and look really good when...

For Sale $1100.00, Picked Up (4) Stock 20" TBSS Wheels -- Painted Gloss Black and Clearcoated wrapped in (4) Yokohama Parada Tires -- 275/45/20 (approx 6k miles on them) Wheels are from 2007 Trailblazer SS. Will need minor touch up paint...very very minor. Wheels meticulously...

Is it common when going to a bigger wheel to feel more rotor warpage? Just got the 22's on yesterday and when I slow down it shakes like crazy. Had some before but not like this. Sent from my SM-G900V using Tapatalk

Well its been a long way comin but i finally did it thanks to tukn4s an bagged00 for some advice on what i need Will be goin with nfamus setup up front later down da road for now just gon look for some 24s and needa find a way to get the gas tank completely in cuz still stick out...

I have a 95 C1500 stepside lowered 4 in front and 4 in back (I didn't do it I just bought it and they cut 2 twists off the front springs and took a leaf out of the back and used a dropped spring hangar) My question is this; I just bought some used 18" wheels with 6 inch backspacing and I'm...

I recently swapped my centerline wheels for my texas edition ( early NNBS 20s ) and while the looks are so much better one of the wheels has started peeling. The clear coat is all cracked and looks really bad,! I want to keep OE wheels but the cost of getting it repaired is about the cost of a...

Started the next build today with the intimidator being completed last week. Just got the truck opened up to get it ready to be cut on Build info 07C 4.8l ccsb Silverado Bagged on 26's Using unparalleled customs front kit Nfamus 3 link York 210 EDC Two 8 gallon tanks 2 piece driveshaft Relay...

New guy here posted a Hey what's up thread now I figured I would post a build thread. Not a full size so idk how much interest this will drum up so we will see :laugh: Bought my blazer December 1st 2014 after selling my bodied 03 S10, my 2000 Xtreme S10 and retiring my beat up 93 S10 ( See a...

:feeler: 20x10 weld chyennes 6x5.5 with 285/50 cooper zeon ltz's. Tires have about 65-70% tread left and come with sensors. Wheels do have some blemishes and need to be polished. At this time I don't want to ship and prefer a local sale. I'm located in Houston Tx. Asking $1700. Will update with...

I picked up my first set of Weld Cheyennes a few weeks back that were in decent shape but needed some work. I proceeded to wet sand 400,800,1000,2000 before finishing off with my Makita 9207spc with a wool pad and mothers aluminum polish. These wheels are never going to be perfect and I was...

In search of this style and wheel. Just checking here before I spend around a thousand on these online.

Hey what's up guys and gals. New guy from KY like the title says, I mainly play with S-series vehicles but I grew up in a GM family. Currently own a 2002 Xtreme Blazer and 1999 GMC Envoy. Also own a 1966 C10, 283 Auto, Longbed, Big back glass truck in the middle of a frame off. Also have a 83...

New to the site so I decided I should post my truck build on here to get some ideas or advice on what to do. My truck is an 02 silverado 1500 bought it about a year ago now and I absolutely love the truck. The day I bought it, it was bone stock which is what I wanted. The truck being from MN had...

Looking to buy a new bed and found one a city over but has over the rails line-x. He's asking $400 for bed and $100 for tonneau. Looking for pics, may not be THAT bad in charcoal. ]Has the keyfob and clamp system. One hinge is broken though. Sent from my SGH-T999L using Tapatalk

Located in Akron, Ohio. I will not ship these. I figured it would be easier to just post the link instead of uploading all the pic on here. Silverado SS OEM 20" wheels with tires