lowered

Shocks i have the 1415 which work on all 88-98 trucks with spindles or stock height set ups only $70 shipped 03-06 CREW CAB SILVERADO 5 INCH FLIP KIT 225 shipped 07-14 gm truck 5 inch flip kit 225 shipped For the rear shocks a pair is $70 shipped. I have them from stock height to up to 8...

Hey gents, new to the forums here. Keep it short as this is my daily driver and nothing too aggressive has been done.... Yet. 2007 GMC Sierra denali NNBS 2/3 belltech drop (spindles & shackles) Hids 6000k (currently retrofitting new ones) Escalade 22" rims for winter 22" 2015 slt chrome...

Finally got some parts on and got it cleaned up ( a little ). Let me know what you think. Its definitely headed in the right direction now. I like the lowered look but I use the truck as a truck. I can take it out to the ranch and tow a trailer or fill the bed with stuff. I really like the...

I will most likely be removing my lowering kit and 24" replica wheels in about a month due to wanting to go back to a lifted truck. Love the look of the lowered ride but it's just not practical down here in south Louisiana especially at the hunting camp. I've only had this kit installed for a...

Well the time finally came where someone bought the wifes 2004 Tahoe and I knew it was time to either buy a junker, or buy something that I completely 100% planned to keep for 5+ years. I have been in love with this truck since I first saw it and it is my fave GM color. I ended up getting a deal...

My buddy has a lifted 2wd. About 6.5"-9" lift and he has air shocks in the rear. 33x12.50 with 20x12s. He is wanting to bag the rear also, where he can adjust while towing or just driving. From level, to bulldogged, etc. He already has a compressor for his train horns. Would it be easier to...

I have a 04 chevy 4wheel drive, Z71. I decided to lower it. I got it custom painted. turning into an SS truck all I need now is rear tailgate cap, rear bumper cover, and the cladding. It has a volant air intake system with the scoop system running to the right front bumper hole. A polished...

1999 Silverado 5.3 2wd K&N filter, true duals cowboy cut exhuast (in front of the tire). 130,000 miles. No plans for it just yet

So I lowered my truck, 06 Sierra ECSB with a flip kit (DJM) and 3in DJM LCA's. The driver side of the truck is leaning more than the passenger side. It's leaning a good inch to 2in more. I don't have any idea what to check. So pleade someone help me ASAP. Thanks in advance

For those of you that know me, i sold my Green 2002 RCSB and just picked up a 2014 RCSB. plan on doing a build very similar to the 2002 i had. Here is a pic of how it sets now. Looking to do a coilover setup all the way around with a narrowed rear end and 24" Intros Already de-badged...

Can someone tell me if I'll need drop shocks with 3in lowered control arms? It's a 2wd NBS Sierra. Thanks

:up:

So I've been browsing craigslist for a while for wheels and I finally found some that I can potentially work out deals on. Wheel 1 6 lug chevy rims sale/trade This guy seems like he is going to be easier to work with on a trade. There are no sensors in them currently, but he said he can get...

New here from GA. I'm new to this forum and the forum world in general. I have two gm trucks; one being a 2006 nbs CCSB, and the other a 1987 R10 rcsb. In this thread, I will post pics of both of them and the progress I've made on them since I've had them. I've had the nbs for a little over a...

Havent seen one of these threads on this site yet or found one so figured id start it since I could use another set of eyes for mine which will be starting soon, Post up them pictures ! tech info would be sweet too ill start it off by posting my favorite sas'd truck my brothers...

02 sierra ecsb flip kit NEED INPUT PLZ!!!!! I've got a 02 sierra extcab jus lowered it using mcgaughy 2" drop springs and mcgaughy flip kit with 1.75 lit shackle. After installing the flip kit and lift shackle the rear end was almost touching the frame..... Needing a quick fix I installed a set...

I was looking into replacing the sway bar end links but noticed that the local parts store has 2 different lengths so my question is since we're lowered are shorter ones better? Worse? The same?

I have a 2005 Crew cab and it currently has a gansta drop ( cut springs, shackles and center leaf removed ) that sits about 2/4ish. I want to add the the leaf back and possibly get a flip kit. I want to use a mcgaughys or belltech kit but they only offer a 4" or 6" drop with their flip kits...

Got this truck back in July. Gonna post progress pics in here. Here is how I got it. 02 LB7, ECSB, 4x4, LS, 138k, mostly stock, ugly af Dem rims tho De-molded, removed toolbox Cut off fgt tip, de-badged, esky tailgate which is now gone Swapped front end off my gasser Cleaned it up a...

][]NISSAN[FRONTI[]][]FORD[RANGER[]][]]&modelCode1=TACOMA&sortBy=mileageASC&driveCode=AWD4WD&makeCode2=NISSAN&modelCode2=FRONTI&showcaseOwnerId=71780&startYear=2000&makeCode1=TOYOTA&modelCode3=RANGER&engineCodes=6CLDR&numRecords=75&searchRadius=75&makeCode3=FORD&listingId=368408469&Log=0"]Click...