lowered

I've gotta 2011 Silverado with the 5.3 and I'm wondering if you can simply remove the cats to do a full custom exhaust without any problem. Sent from my iPhone using Tapatalk

24" tire/wheel on lowered truck. I've gotta 2011 Silverado and I'm wondering what size tire I would need with 24" wheels with a 4/6 drop. Also, how wide of a tire/wheel can you go on these trucks and still be able to tuck? Sent from my iPhone using Tapatalk

I have a 95 C1500 stepside lowered 4 in front and 4 in back (I didn't do it I just bought it and they cut 2 twists off the front springs and took a leaf out of the back and used a dropped spring hangar) My question is this; I just bought some used 18" wheels with 6 inch backspacing and I'm...

:feeler: 20x10 weld chyennes 6x5.5 with 285/50 cooper zeon ltz's. Tires have about 65-70% tread left and come with sensors. Wheels do have some blemishes and need to be polished. At this time I don't want to ship and prefer a local sale. I'm located in Houston Tx. Asking $1700. Will update with...

Looking to buy a new bed and found one a city over but has over the rails line-x. He's asking $400 for bed and $100 for tonneau. Looking for pics, may not be THAT bad in charcoal. ]Has the keyfob and clamp system. One hinge is broken though. Sent from my SGH-T999L using Tapatalk

For a while now I have had this vibration from 85-105 MPH. From 105-120+ its smooth again. After I lowered it I had the driveshaft angle all screwed up and had to get a larger degree shim. That fixed the WOT vibration and vibration from 65+. Now the only vibration I have is from 85 to about...

Well I said I wasn't going to start a thread but here I go. Probably more just for time line than anything. Won't be anything real special just a daily that doesn't look like every other truck in town! Started today with prepping for the arrival of parts! I took pics but apparently I don't have...

Well as most of you guys know I'm formally known as 07CCSB. I built a 2007 Silverado a while back and had my build thread on here. This thing was lowered and lifted multiple times lol couldn't make up my damn mind so I finally dumped a lot of money into it and didn't get shit out of it...

I picked up this truck at the end of last year. Been poking around fixing what I can, and keep coming back to the sway bar. Its running drop spindles and cups in the front. The bolts for the original sway bar hold down are still in the frame rails. I'd like to get a sway bar back in...

01 Silverado lowered on 22"x9" stock Escalade fronts and replica 24"x10" rears, I know the Escalade thing is played out, but this is going to be my daily, and I want luxury! Still have to install my ART coilover setup in front, and my Nfamus 3 link converted to coilovers in the rear. I also...

Hoping someone here has some incite My new ram has a 4 link and panhard bar from Factory. I added new link bars that you can adjust, and rear air bags to replace coils Naturally as its lowered the axle has shifted to the passenger side. Hence why I also purchased an adjustable panhard...

2012 gmc Sierra 1500 crew cab Front 2" spindles 2" springs Rear. 7" flip kit with belltech street performance shocks. I had a 4"/5" drop and it was even. Now I wanted a 4/6 I lowered it and now my truck is not even. From top off fender too top of tire On the front driver side I have...

I've been looking for a nice set of factory 20's an these are for sale locally but they say they are from a 1/2 ton van. Are these the same offset and lug pattern as the fullsize GM truck 6 lug pattern? https://stlouis.craigslist.org/wto/5420525745.html

Attn Smart People Now that i have weened out the dumb dumbs For my new ram, Im looking for adjustable sway bar links. Lowered rams use 2012 F150 Sway bar links up front. Im looking for an adjustable pair. I have searched around the f150 forums, with no avail. Only company i can think of is...

I recently lowered my truck and cant decide between wheels. Currently riding on Centerlines, but kind of want a factory wheel. That being said, I was wondering if someone would chop some wheels on my truck Thanks in advance!!! The wheels on this 2015 On my 2005 CCSB

Before: ECSB Springs with 1" daystar lift spacer & shackles set on 2" ( you read that right!!! to sit level I had to lower the rear 2" and raise the front 1"... ) 285/50/20 After: 2" Drop Spindles with 1" drop ECSB Springs and moog Isolator ( factory height ) & Flip Kit out back set at 5"...

So this weekend I installed a flip kit on my 2005 crew cab Silverado! Looks insane, but has a vibration ( go figure right? ) I have a 3* shim in it right now and there is not vibration while city driving ( as far as I can tell anyway ) but there is a vibration at wide open throttle from...

Hey guys! This is gonna be a thread to document the progress on my Sierra, it's called a bucket of mixed emotions because it's been up and down with this thing since the day I bought it. It's a 2003.5 ECSB 4wd GMC sierra work truck edition, it was a municipality truck I bought for 3600 bucks...

Bought this truck almost a year ago, so might as well make a built thread... The night I picked it up with 113k miles The next day it was snowing, ugly bull bar and zone leveling kit [emoji20] With the shitbox G8 I sold after buying the Sierra Cleared the headlights, added clear turn...