how to

  1. Tylers88

    Tyler's snowmobile build(ish)

    Well some of you know from Facebook and the fapbox I was gifted a snowmobile last weekend. 1993 Polaris Indy XLT Special, special just means it has Fox shocks stock and not the junk throw away shocks, set of old school PSI Racing triple pipes, wired for egt gauges but gauge broke, studs and...
  2. Samuel6731

    What enclosure?

    So i bought two Sundown SD2-10s DVC 4ohm They need a 4.75" mounting depth. Id like to go under the seat down fire. I ordered a subthump, then realized shortly after their box is limited to a 6" diameter magnet the subs have a 7.25" OD magnet so I got a refund. Question, do any of you...
  3. wretched73

    Opinions on what and how to paint

    So my spiral gray metallic, ext cab, reg bed Z71 silverado's cab corners and rockers are rusted out. In the next month or two i plan on having them replaced and figured i would get a couple of things color matched while i was at it. So far, i am going to color match my door handles...
  4. SamCarroll

    FFR Heims? Beware

    FFR, Ive tried to handle this via PMs/Emails/posts multiple times. Each time i was told "they must not be tight enough" or "installer error". This absolutely sent me into a white fiery rage. I've worked in customer service for over 10 years and i hate when someone doesn't back their own product...
  5. Slow05CC

    NBS Exterior Door Handle Removal

    I just got my escalade handles back from the body shop and I was wondering if there is an online tutorial that shows how to replace them? IIRC there is a cap that needs to be removed to access one of the bolts but I have no idea how to get to the other bolt, or to connect the handle to the...
  6. stanced stepside01

    Incoming Newbie

    Hello im from Missouri and drive a 2001 ecsb chevy stepside z71 with a superlift 6-7.5 in kit with 3 in keys and trucks debadged with a few bolt ons under the hood. I still cant figure out how to post pics been at it for about an hour and I looked at the how to stick thread and it didn't help me...
  7. JennaBear

    For Sale: Used Magnacharger TVS1900

    For Sale: Used Magnacharger TVS1900 for Cathedral port head engines. Easily fits: 2007-2013 4.8L, 5.3L Truck/SUV; 2006-2009 Trailblazer SS Can be made to fit: 2002-2007 4.8L, 5.3L, 6.0L with 4 bolt throttle body swap Supercharger integrity has been reviewed by an authorized Eaton Repair...
  8. '02 sierra

    99-07 DL3 mirrors

    Pair of DL3s removed for tow mirrors. Power folding, heated, signal, black caps Asking $150 shipped obo Located in Amarillo Texas. Will ship.
  9. BOO5TED

    Dome light question

    Anyone know a way to find out which terminal is + and which is - on the dome light in the crew cabs? I'm trying to use all three festoon bulbs as the dome light and do away with the two buttons. This is what I have. This is what I'm thinking of doing.
  10. BARBER

    Question about Escalade center console trim

    For the 03-06 Silverados with center consoles, the upper trim pocket/panel piece, will an Escalade piece go in and flow with the rest of the console? Link to said Escalade piece...
  11. P

    Lifting and bagging 1996 2wd 1500

    My buddy has a lifted 2wd. About 6.5"-9" lift and he has air shocks in the rear. 33x12.50 with 20x12s. He is wanting to bag the rear also, where he can adjust while towing or just driving. From level, to bulldogged, etc. He already has a compressor for his train horns. Would it be easier to...
  12. Jackal

    question...

    First off, sorry if i didn't post in the correct section. Wasn't sure where to post this. My question is, has anyone ever made their truck a short bed? What i'm talking about is the option that came out in the 05/06 ext cabs. I know the bed measures 5.8 feet, and its basically the bed off of...
  13. 99blue_silverado

    Led's in dash

    Have yall done this? I did it and they started flickering on me. I couldn't figure it out but then i remembered led's don't need alot of voltage, so if your turn the dimmer all the way down then back up to when they come on they stop messing up!
  14. 2Wheelin'

    New from Kansas City, Missouri

    Sup guys, My name is Joel, I'm Fiesty's brother. I just got my first truck. It's a 03 Silverado 2500HD Extended Cab. I'll get a build thread going here soon. pretty gay. just got it a couple hours ago. light bar and grille guard already off.
  15. GR$$N$

    Project watermelon

    So picked this gem up yesterday from bakersfield. Plans are to bring it back to life and change the paint immediately. Fix some of the fuck ups and resale it probably
  16. Deweyknosbest

    Dewey's 07 Classic Slow Build RCSB

    Hey guys. Starting this thread to formally introduce myself to the forum. Done a lot of reading but not a lot of posting so here this goes. Anyways got this truck in July of 2013. Unfortunately I didn't get any pics of the day it came off the lot. It was the WT so I have manual everything and...
  17. slicksierra

    Detailing hacks!

    Not sure if we have a thread like this but I know there are more than enough pictures and videos to kick this thing off! HOW TO WAX A CAR - YouTube
  18. P

    Body Drop Thread

    I have heard about doing a body drop, I was wondering what all it consists of. The before and after pictures. The pros and cons. Price. I don't know much at all about it. If someone could inform me, that would be greatly appreciated. Pictures will help too. Thanks in advance guys!
  19. ITDROPT

    New Project 04 RCSB Silverado

    Well here's the new project. 2004 Silverado RCSB that was previously bagged and tubbed for 24s by the choppin block in 2007. - - - - - - - - - -auto merged double post- - - - - - - - - - First thing to go was the stock cloth and center jump seats. I replaced them with the katzkin leather...
  20. 9X37Crewcab

    Drl sensor help

    On my 06 silverado i had the windows tinted and had a brow across the top and bottom of the front windshield. Now my headlights come on all the time and add you can imagine is annoying having to turn off headlights every time u get in. Is there any way to modify the sensor so that its more...