ride

6 inch suspension with extra leaf on each side. Well this is going to be a long strung out process. But I purchased this jewel for $1000 needed a new motor new cooling system new new tranny and new suspension parts. I pulled the old 350 out threw it behind the garage it needed new heads and a...

This is the build thread of my truck this is when it was completely stock Then detrimmed/detrimmed her and put a billet grille in wasn't high enough so put on a 6-7.5 superlift kit with the dual shocks and she got a fresh detail also got some cheap ebay lights that tarnished away...

I will most likely be removing my lowering kit and 24" replica wheels in about a month due to wanting to go back to a lifted truck. Love the look of the lowered ride but it's just not practical down here in south Louisiana especially at the hunting camp. I've only had this kit installed for a...

I just ordered a set of these and was wondering if anyone is running them? I ordered them in a 285/50/20 because I am going to raise my truck back up some. I am currently riding on Nitto 420S and I love them but I cant get a hold of them anywhere. I was just wondering how well they hook up in...

I see a few people on here run coilovers. Looking for help if it's possible to run ride tech coil overs with djm lower control arm? Do they need to reinforced? I don't want stock arms because I want a drop that is 7.5". Currently I have djm uppers and lowers and coils. Planning on buying 16+...

My buddy has a lifted 2wd. About 6.5"-9" lift and he has air shocks in the rear. 33x12.50 with 20x12s. He is wanting to bag the rear also, where he can adjust while towing or just driving. From level, to bulldogged, etc. He already has a compressor for his train horns. Would it be easier to...

I've been thinking a while about switching to an A/T tire and switching out my 4" blocks for the 4.5" blocks I have. The truck right now has 1.5" of lean but the rear just seems to sit too low and I think bringing it up .5" would be perfect. I've also been thinking of switching out my nitto...

So I'm really undecided on what to do with my truck now that I have the HD hood and grille. I've been running over these three options in my head and can't make up my mind, so I'd like some input from the CGM family on what direction to go. 1) 3" level with 2" rear block. For the front I would...

Hey everyone! Some of you may have heard rumors of a staff project in the works and we're finally at a point where we're confident we can let you in on the secret . For about a month and a half we've been working on bringing you guys a CustomGM.com 2015 Calendar, featuring the 12 ROTM winners...

Hey guys I'm new to the site just came across it this morning. I'm from south Louisiana and belong to the club diverse customs. Here's my 2013 sierra

Bilstein 5100 Shocks for stock or leveled trucks. 12K miles on them. 24-186735 Youll probably want to get new bushings for the top as i cut the ones i was using in a pinch to work with my lift. Still usable, just ghettoish:insane2: Fits 01-10 1500HD/2500HD/3500HD 2wd/4wd 90$ shipped to the...

this one is Def getting bagged Here's how it's hopefully guna look soon

I have a 04 chevy 4wheel drive, Z71. I decided to lower it. I got it custom painted. turning into an SS truck all I need now is rear tailgate cap, rear bumper cover, and the cladding. It has a volant air intake system with the scoop system running to the right front bumper hole. A polished...

A few of you know but I bought a 2011 Hyundai Sonata SE last week.... we've been looking for a car for a while to replace the mustang my girl had before that I sold. Got a awesome deal and it only had 28,311 miles on it when I bought it and fully loaded with sunroof, navi, leather... Was a steal...

For those of you that know me, i sold my Green 2002 RCSB and just picked up a 2014 RCSB. plan on doing a build very similar to the 2002 i had. Here is a pic of how it sets now. Looking to do a coilover setup all the way around with a narrowed rear end and 24" Intros Already de-badged...

Maybe you guys can give me an idea of what's best to run between the spacer and lift spindle.. my truck is a 97 c1500 ecsb . Now I know both will stiffen up the ride and I'm fine with that, what I don't want is to find out after that I should have used the coil vs the spacer or vice versa.. one...

Been looking at doing an HID retro in my 2005 silvy. Bi-xenon Morimoto Mini Stage III Kit (H1) This is the kit I want to install. I'm only planning (at this point) to do the M1 in the high beam location. Its much deeper and should require less cutting. This is the write up I am going...

Hi all, new guy on here. I found this forum on tapatalk. I see lots of off road guys. Am I in the right place? My ride is a 1995 s10 blazer 4dr 2wd. 355 SBC,T350, 4.10's, full belltech suspension, line locks, and 2dr fuel tank to be able to accommodate custom side exhausts boxed through the...

New to the forum, im from Arkansas herd alot of good things about this forum looking forward to some of your input.

Sup ladies. For those who don't already know I traded the nbs in for this NNNBS lol. First off its a 14 Sierra SLT with black leather, 2wd with driver alert package. I've never owned a brand new vehicle before so this is awesome to me. As far as mods go, not really sure yet. I kinda...