Your vehicles as they sit now!

Well back on stocks for now till i find the wheels i want. Then ill get the lift installed just gotta find time. Doing a 4/7 drop on a buddies 17 Thursday.
160b0a733c4df134bb4bdee38294736d.jpg


Sent from my SM-G955U using Tapatalk
 
Pulled the heads last night. Stock bolts backed off. I wanted to see if any bolts were loose so I used 3/8 ratchet and almost no effort to loosen the back 2 on the passenger head. Block is good. So that’s a relief. Heads are at the machine shop getting checked out. Should be done tmw. Hoping to have the time to put it together this weekend.
87d5c633a091d8904913c220bff96c0f.jpg



Sent from my iPhone using Tapatalk
 
dszx13 said:
Pulled the heads last night. Stock bolts backed off. I wanted to see if any bolts were loose so I used 3/8 ratchet and almost no effort to loosen the back 2 on the passenger head. Block is good. So that’s a relief. Heads are at the machine shop getting checked out. Should be done tmw. Hoping to have the time to put it together this weekend.
87d5c633a091d8904913c220bff96c0f.jpg



Sent from my iPhone using Tapatalk
Click to expand...

Glad it wasn’t any worse, bro!


Sent from my iPhone using Tapatalk
 
I guess I have a buying problem. This 93 Jimmy fell into my lap the other day for next to nothing. 1 owner SLT with 135k miles. All original and stupid clean for its age. No clue what I’m going to do with it yet
f6d15ed248a942511145acf00e7dd4b8.jpg
478ff6c9d82ca025914a3ca126caf9bf.jpg
c3151e38accbc5efddb2e6e00d85f428.jpg
 
WhiteMike said:
I guess I have a buying problem. This 93 Jimmy fell into my lap the other day for next to nothing. 1 owner SLT with 135k miles. All original and stupid clean for its age. No clue what I’m going to do with it yet
f6d15ed248a942511145acf00e7dd4b8.jpg
478ff6c9d82ca025914a3ca126caf9bf.jpg
c3151e38accbc5efddb2e6e00d85f428.jpg
Click to expand...

Slam it on billets, of course.


Sent from my iPhone using Tapatalk
 
BigBoi said:
Washed her and tried some ceramic coating that my buddy got from a chrome shop. About to rain so we’ll see.
c70b35a6d89fd1bbfc552c9e471f5e84.jpg



Sent from my iPhone using Tapatalk
Click to expand...
you...YOU installed a coating? Here we go.

Also coatings usually have a 24-48 cure time where they're not supposed to get wet or they could streak.

Unless its some bullshit in a spray wax form, then its not really a coating.
 
I rarely use it. Thought it would be cool so had the dealer install one. Only time I really use it is if I pull up on a beach.

I’d def get two tho. The few times I’ve used mine, the boat pivots on that one point.

I’m looking at getting one of the trolling motors with SpotLock. The power poles are only good to a certain depth. The SpotLock keeps you locked in no matter what. Took the boat out yesterday and one of my favorite spots had an ass of current rolling through it. Had to stay on the trolling motor the whole time. SpotLock would’ve been amazing to have.


Sent from my iPhone using Tapatalk
 
BigBoi said:
I rarely use it. Thought it would be cool so had the dealer install one. Only time I really use it is if I pull up on a beach.

I’d def get two tho. The few times I’ve used mine, the boat pivots on that one point.

I’m looking at getting one of the trolling motors with SpotLock. The power poles are only good to a certain depth. The SpotLock keeps you locked in no matter what. Took the boat out yesterday and one of my favorite spots had an ass of current rolling through it. Had to stay on the trolling motor the whole time. SpotLock would’ve been amazing to have.


Sent from my iPhone using Tapatalk
Click to expand...
I haven’t done the poles because our lakes are stupid deep so it doesn’t make sense. I have a normal trolling motor I just work while I’m up front fishing. Works well.

My brothers new Nitro has the handheld and GPS tracking trolling motor which is badass just overkill lol
 
You must log in or register to reply here.
Top