Recent content by FTC

So since installing, I've been tearing up bushings every couple of months. I never hit sides. So I went ahead and changed out the bar ends to heims, for a little bit of articulation. I can't do the uppers just yet, because to set pinion I had to extend them more threads than a regular heim...

anybody ever use these?? http://www.amazon.com/ACDelco-45K4032-Professional-Suspension-Assembly/dp/B00S0AM0FU/ref=sr_1_1?ie=UTF8&qid=1428948919&sr=8-1&keywords=45K4032 I'm looking to get some negative camber and negative caster, not quite sure how they install or if they're any good. Camber...

Ok so I'm redoing my air management and need another set of eyes to see if there's something that I'm missing, or possible issues I may run into. More so for servicing wise than anything cause I can't really tell mocking up everything with the bed off. Maybe any routing issues, or won't be...

Sup guys, finally started work on the back of my truck!!! So my plan is to raise the bed floor 3" so there will be no holes in the bed. Before anyone says go more, I never plan on ever doing a bd on this truck or going larger than 22s. Plus I already have 3" body lift spacers which will work...

So I figure the rotor has to be pretty damn close to parallel of the hub, so I've been just throwing the angle finder on my rotor face to get a reading. How close to actual camber does this read? I eventually will make a bar to clamp to the tires but for now I'm just using this. If not for...

99-06 sulastic rubber shackles, took these off to use some lift shackles. They work as advertised and make the rear ride noticeably softer. I think they will also fit nnbs trucks as well, please confirm first. Rubber is still in great shape and will come with the allthread to open up the...

Sup guys I have a 02 4.8 RCSB. Over the past few months I've been getting random p0171 and p0174 both banks lean codes. It'll be on for a few days then go back off, my initial thoughts were vacuum leak. But I cant find one, I've changed MAF, intake and throttle body gaskets, and the evap...

Set of ART upper and lower control arms. Lowers were built for shockwave/coilovers but I TIG welded flat plates on them to use regular bellow bags. I am a professional certified welder. All ball joints are fresh, 3 months old. One side of the lowers the bj became loose in the bore so it is...

Selling my coilovers, don't need them and can't ever go back to static anymore anyway. These came off my RCSB, they are 800 lbs/in spring rate and I believe 24 way adjustable shocks. Only about 4 months old, black stuff you see is anti seize. These coupled with mcG 16+ spindles and FFR heim...

sup guys, since specialty suspension stole my money for a step notch. I will be building my own from box or rectangle tubing. Just wanted to get some opinions on which would be better to use strength and fit up wise? Leaning towards whichever one is easier to fitup as im fairly sure the...

Sup guys, after seeing wickeds bag build I got the bug...again. Had a couple of bagged s10s back in the day when I had no fab skills, now I'm a welder and have way more flexibility now with this build. This is my daily but I do have a weekend cruiser if I need to leave the truck down for a day...

Sup guys, this morning I hit a pothole and turns out I blew my front pass tire out...on the outside doesn't appear to be any wheel damage(not bent or scuffed at all), is it possible to have damaged the wheel internally?. Looked like the bead flipped out but not quite fully but still wouldn't...

Got a pair of 6.5" travel fox 2.0 remote reservoir shocks for sale, in excellent condition. just a little dirty from being under the truck. Came off my 02 Silverado lowered 6" out back but will work with up to a 8" drop possibly lower. They are valved at 30/35 which is perfect for street...