FS: ART arms for NBS - HI

F

FTC

Just a dumb welder
Set of ART upper and lower control arms. Lowers were built for shockwave/coilovers but I TIG welded flat plates on them to use regular bellow bags. I am a professional certified welder. All ball joints are fresh, 3 months old. One side of the lowers the bj became loose in the bore so it is tacked in so it won't move. Uppers have studs welded to them so the brake lines can be securely attached. The lowers have shock tabs welded to the front side and an accuair tab on the backside, they have no provision for a sway bar. They are currently painted black, but could probably use a better paint job. $500+shipping which I will have to check on pending location cause they are pretty large.
ytunyqan.jpg

avemuger.jpg

gy6a3ypa.jpg

amybapy9.jpg

ju3yny3y.jpg

renanudy.jpg

ehuba3av.jpg






Sent from my iPhone using Tapatalk
 
Last edited:
mike. said:
You need.



GLWS, what are you planning on doing now?


Sent from my b hole
Click to expand...


I actually have switched over to mmw arms since raising uppers, I wanted my track width narrowed so I had to switch. These arms rode/functioned great while I was using them tho.


Sent from my iPhone using Tapatalk
 
FTC said:
I actually have switched over to mmw arms since raising uppers, I wanted my track width narrowed so I had to switch. These arms rode/functioned great while I was using them tho.


Sent from my iPhone using Tapatalk
Click to expand...

Gotcha. I ordered MMW upper/lowers to narrow mine too. Hopefully they'll be here soon.


Sent from my b hole
 
You must log in or register to reply here.
Top