Bassmaster
Media Mod
I broke my tailgate bezel Clip too :rage:
Stocko
Stocko
Gotta keep all those 200 ponies under control lolfking Colorado tie rods beefier than my Dmax's :nono:
Send snap of stack rolling coal or stfu
Had to screen cap my buddies
Sent from your girls iPhone.
Le dirty truck is le dirty. I broke the clip in the tailgate handle too.
Sent from your girls iPhone.
At first I thought you put a basketball goal in your bed too.
This truck wasnt exactly built to be mechanic friendly lol. Removing the valence was absolutely absurd. Its like the truck was upside down when they put it together. You have to take off 9 things to reach the bolts for one thing. Everything on the truck overlaps something else.
And also, the 3 bolts on top of the strut needed to be trimmed. So any hopes of putting the spacer on top the strut while the bottom is still attached to the LCA went out the window.
:rofltank:
Oh, and it's called a net or a hoop :read:
I haven't looked. I'm gonna look at it after work to see if it has the 1.25" blocks like the NNBS so I can remove it.
I thought that zone kit came with lift blocks? Or you gotta flip the axle?I'm guessing the leafs are under the axle
Sent from your sister's house
The net is the rope that is connected to the round orange thing which is called the hoop or rim. That is then connected to the backboard that is connected to the post. All of it together is called the goal. :crossarms:
:cheeky:
I thought that zone kit came with lift blocks? Or you gotta flip the axle?
Leafs under the axle would be sweet then I could just get a 1" block to acquire my level/cali