Dean's '11 Crew Cab Budget Build

I actually saw those the other day KKirwan71. If he wasn't so far away I'd jump on em, but shipping would kill any deal on them.

And don't worry mike. I plan on keeping them. I think they will look great with some meaty tires on them.

Sent from my SAMSUNG-SM-N920A using Tapatalk
 
DeanH1290 said:
I actually saw those the other day KKirwan71. If he wasn't so far away I'd jump on em, but shipping would kill any deal on them.

And don't worry mike. I plan on keeping them. I think they will look great with some meaty tires on them.

Sent from my SAMSUNG-SM-N920A using Tapatalk
Click to expand...

TILLER is selling his coopers


Sent from my iShit using Tapafuck
 
No he's just feeling the waters lol he wants Toyos again I think. His are 22s


Sent from my iShit using Tapafuck
 
Ive been talking with some other members lately about it and I think I'm going to bring the truck up another inch up front, making it 3.5" of of lift. Before everyone starts screaming about angles and ball joint wear, finish reading the post.

I jacked the front end of the truck up to simulate the angles at 3.5" of lift up front. Here's how it looked.
751bf84ae4b5a1bd0203735f5c10ccc2.jpg

f205fab0137d3b577b35f0959638b24f.jpg

ebfd86fac141fe494e1233002c64a944.jpg

22ad62de9b4419fb482e82b214771c85.jpg


After discussing it with other members who have off-road setups, the angles look much better than expected for that amount of lift with no diff drop or bracket drop. After seeing the angles, I'm pretty sure I'm going to do it. I will most likely just move up a notch on the bilsteins which will net 3.25 or more of lift.

Here's an updated list of plans to help keep me on track.

1- Increase level to ~3.5" and swap 1" rear block for 2" rear block
2- Add wheel spacers (either 1.5" or 2")
3- 33x12.50R22 or 305/45R22 Tires. I'm still undecided on what I want, but need to save up some funds for them too.

Sent from my SAMSUNG-SM-N920A using Tapatalk
 
Those are good angles, I say do it! My truck's got slightly steeper angles than that and have no issues whatsoever. Wish RC made UCAs for NBSs, my only option is Cognito and those are $$. But I def need them

Sent from Tapatwat
 
:fp: what you smokin? Really needs 22x10 with lip, but I ain't ballin like that.

With the current tires it should be closer to flush, which is what I want. When I move up to 33s they will be wider which means they'll poke more.

Sent from my SAMSUNG-SM-N920A using Tapatalk
 
I'm just too lazy to grind studs so I took the easy way out lol

Sent from my SAMSUNG-SM-G920A using Tapatalk
 
Alecks said:
:scared: maybe different for nbs but you have unthreaded nipples on NNBS studs

Sent from my SAMSUNG-SM-G920A using Tapatalk
Click to expand...
Some oem wheels have pockets between the lug holes on the backside making it so you don't have to trim the studs.

Sent from my SAMSUNG-SM-N920A using Tapatalk
 
Little update - the 1.5" spacers showed up yesterday. They seem to be good quality. Can't tell if they are painted or coated (can't remember what it's called for alum) but there weren't any nicks/chips. They were packaged really well too.
c2b0cb10e967e1fdd150ae7f26b51d2b.jpg


Got them installed and luckly didn't have to trim studs since my wheels are relieved on the backside. After seeing them on the truck, I'm glad I stuck with 1.5" and it came out exactly how I wanted it to.

f3250040ea8201d6b10223da1439088c.jpg

69423d098a3a6eaa83730410b84c7ce8.jpg

7799b826addf18b0164360d296fe3975.jpg

d197ef4183ac212ed8edc50b5688b405.jpg

ac3cb047d890c3cb9cade8748d696e63.jpg


I also found a good deal on some FFR Fabrication tie rods, so those will be going on when I go up to 3.5" up front. Hopefully they will eliminate any issues with the steering angles at that height.

Sent from my SAMSUNG-SM-N920A using Tapatalk
 
You must log in or register to reply here.
Top