99-02 PW/PL Switch Wiring Question

Discussion in 'Audio, Video, and Electronics' started by Khaos, Jan 31, 2016.

  1. Khaos

    Khaos Bed Dent Club Founder

    Messages:
    20,302
    I'm going to be converting my '04 WT to power windows and locks (but not mirrors) using 99-02 panels and switches, due to the switches having internal relays and not needing to go through a BCM.

    I am also going to be running an exhaust cutout.

    My idea is to use the unused power mirror switch on the 99-02 switches OR one of the rear window switches (if I get a crew cab switch) to open and close the cutout if possible.

    Does anyone know if either the mirror switch or one of the two rear window switches acts as a DPDT switch, or can be made to act as a DPDT switch? If so, can I get a walkthrough?

    *paging ScottyBoy* :crazy:
     
  2. Cleanoh4

    Cleanoh4 Well-Known Member

    Messages:
    4,311
    No luck on diagrams bud. Sorry
     
  3. Khaos

    Khaos Bed Dent Club Founder

    Messages:
    20,302
    Thanks for looking. Hoping someone chimes in and knows how they're wired and can give a hand.
     
  4. HackMcMaster

    HackMcMaster Active Member

    Messages:
    4,755
    @TechieTruckGuy
     
  5. TechieTruckGuy

    TechieTruckGuy 3.5 EcoHell

    Messages:
    4,729
    Chris go to http://alldatadiy.com/

    It's where I got all my diagrams when I did my conversion.


    Sent from the 4.hate using tapaturd
     
  6. Khaos

    Khaos Bed Dent Club Founder

    Messages:
    20,302
    Thanks Anthony, I'll check that out later at home. I forgot about that site. Tried looking on The12Volt quick but couldn't find anything... Didn't go digging though. Gonna have to get my :nerd: on and dig
     
  7. BOO5TED

    BOO5TED Resident Smartass

    Messages:
    20,163
    When I was thinking about bagging the Silvy my plan was to use a crew cab driver door window switch and use the rear switches for the front and back bags.
     
  8. Khaos

    Khaos Bed Dent Club Founder

    Messages:
    20,302
    So, It looks to me like (with my admittedly huge lack of understanding) that the windows switches should be dpdt like the cutout switch, but I can't make heads or tails out of the wiring diagrams...guess I should have paid more attention in Electronics 101 :laugh:

    I saved all of the diagrams for a 2001 silverado, so that's a plus (thanks for the site Anthony). Anyone care to take a look for me?

    This is the wiring for what would be the left rear window switch. You can ignore the motor wiring and all of that seeing as I only have 2 windows to worry about.

    [​IMG]

    Here's the actual .pdf if it isn't clear in the picture

    https://www.dropbox.com/s/ast8r3bnm...ndow Switches - Driver and LR, G305).pdf?dl=0

    I would like to have one of the rear window switches function as the switch for the cutout if at all possible.

    ----------------------------------------------------

    Ideally, the left rear window switch would be the cutout and the right rear would eventually be for helpers. Great minds think alike...it's just implementing it that kills me :rofl:
     
  9. BOO5TED

    BOO5TED Resident Smartass

    Messages:
    20,163
    Yeah, I researched like crazy but gave up after seeing the schematics lol.
     
  10. Khaos

    Khaos Bed Dent Club Founder

    Messages:
    20,302
    That's why I'm hoping someone can decipher this and help out lol
     
  11. TechieTruckGuy

    TechieTruckGuy 3.5 EcoHell

    Messages:
    4,729
    :shake:


    Sent from the 4.hate using tapaturd
     
  12. HackMcMaster

    HackMcMaster Active Member

    Messages:
    4,755
    wtf is that diagram supposed to be of?
    also would think switches would be SPDT
     
  13. TechieTruckGuy

    TechieTruckGuy 3.5 EcoHell

    Messages:
    4,729
    Chris might be easier if you get actual pin out versus the wiring diagram.


    Sent from the 4.hate using tapaturd
     
  14. Khaos

    Khaos Bed Dent Club Founder

    Messages:
    20,302
    Of course I only added that diagram to my db. I'll post it later when I get home.

    And I found a lot of kits and sources saying power window switches are dpdt. But these could obviously be different.

    - - - - - - - - - -auto merged double post- - - - - - - - - -

    Seems like I can't find a pinout of any switches....fak.

    Need to dig deeper.
     
  15. slicksierra

    slicksierra Feel some type of way

    Messages:
    5,453
    Not to interrupt but what ur saying is in order to add power locks and Windows to any pre 03 truck all you need is the door panels, switches and regulators and it's all just power and grounds from there?
     
  16. Khaos

    Khaos Bed Dent Club Founder

    Messages:
    20,302
    Yep. Simply put, 99-02 switches are actual relays that can be wired for almost anything (hence this thread) whereas the 03-07c just send signals to the bcm and the bcm tells the windows and locks and seats and mirrors what to do.
     
  17. HackMcMaster

    HackMcMaster Active Member

    Messages:
    4,755
    Now kinda want to graft in a set of crew cab window switches for le bags
     
  18. Khaos

    Khaos Bed Dent Club Founder

    Messages:
    20,302
    It would be cool to figure this out so I could have my cutout on one and helpers on the other eventually.

    I'm off today so I'm gonna grab my switches, my cutout, and my power supply and see what I come up with, if anything.
     
  19. HackMcMaster

    HackMcMaster Active Member

    Messages:
    4,755
    Open it up so you can see how it works, it's what we would have done before the Internet
     
  20. Khaos

    Khaos Bed Dent Club Founder

    Messages:
    20,302
    That's the plan, I just didn't have time this weekend. I'll see if I can get it to work.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice