Low01silveradO

New Member
Nov 27, 2012
498
1
0
My 01 4.8 ECSB put down 333/309 on the dyno. I'm very happy with it.

The tuner stopped at 130mph and the graph was still climbing and would've made it to around 345ish hp but he didn't trust the stock driveshaft running that fast.

I'll get 4.30s and truetrac one day and put it back on the dyno for a full pull.

Sent from my One X using Tapatalk 2
 

Low01silveradO

New Member
Nov 27, 2012
498
1
0
Lol, I started it long ago and ain't no way I could copy all that shit over.

Thank you

Sent from my One X using Tapatalk 2
 

Low01silveradO

New Member
Nov 27, 2012
498
1
0
I used:

214/222 .595 .602 on a 113 + 2 EPS Cam
243 heads milled .040
NNBS Intake Manifold
Stock 78mm Throttle Body with FAST adapter
Longtubes/ORY
7.375 hardened pushrods
Ls7 lifters
Ls2 trays
Tr55 plugs
MSD Super Conductor wires
160 thermostat
And hoped for 330+


The tuner said that intake must do a lot because he was surprised by the numbers. And just as I've seen many many times, he said 90mm throttle body would make it much more difficult to drive. And it would lose low end considerably IMO from what I've seen. Need as much low end as u can get in a truck. I'm lovin it, and very happy.

Sent from my One X using Tapatalk 2
 
Last edited:

Low01silveradO

New Member
Nov 27, 2012
498
1
0
Here's the graph. It's actually 334/311 and still climbing when he stopped at 130mph

emyde4u8.jpg


Sent from my One X using Tapatalk 2