trans cooler info, please help

[Jared]

When doing the trans cooler install, what fittings do you recommend or just install it as it comes?
I bought this
http://www.summitracing.com/parts/bmm-70264
But was told to get the Dorman 800-606 and Hayden 397. Anything else? Any other input? Thanks in advance.

I was told to get these
GM Female Quick Connect Oil Fitting
GM Male Quick Connect Oil Fittings


I am trying to figure all this out asap

 

[2005_Silverado]

like i said in the chatbox....i see no need for the GM quick connect adapter unless the trans case has some sort of special thread size/pitch...which in that case Id get the gm quick connect and one/two of these

SUR&R® - 3/8" GM Male To Rubber

 

[Jared]

Trans cooler install project - Pontiac G8 Forum: G8 Forums - G8Board.com

 

[2005_Silverado]

so ur car already has a cooler, its just not an external one

elaborate with what u have and dont have?

 

[Jared]

I've never seen a GM without an external or through the rad...

 

[2005_Silverado]

Trans cooler install project - Pontiac G8 Forum: G8 Forums - G8Board.com

if u wanna do it like he did....all u need is this lil guy then

GM Female Quick Connect Oil Fitting

and something to cut the tube with...i have one like dis

http://www.amazon.com/TEKTON-6460-Tubing-Cutter-O-D/dp/B000NY6QUG/

makes cutting the line nice n easy with a clean cut.

 

[Jared]

this is what one guy is using

 

[s3gulit]

Get some proper pitch to -6 fittings, PTFE SS line, and run it to a derale or other similar e-fan cooler.