Dec 19, 2012
113
10
18
Vermilion, Alberta
305/40. rubs some. ganna go to a 285/ 40 soon though. don't want rubbing when loaded down..


Sent from my iPhone using Tapatalk

I hear ya! My stock 275/55/20's rubbed like crazy till I cut the front fender liner on top of where the tire was rubbing. Only rubs on big dips in the road now. I wanted 24s but don't wanna run a rubber band as I plan on using this thing to haul stuff from time to time.
82884ED8-BC47-4ED0-885B-0A81D3162F6D_zpsp6uca5mo.jpg


Planning on running a 22 with a 285/35 tire
 

DeanH1290

Well-Known Member
Jan 20, 2014
4,931
410
83
33
Georgetown KY
Thanks man. These tires are just on the edge of being too big. I'll definitely have to go smaller if I ever go lower

Sent from my SAMSUNG-SM-N920A using Tapatalk
 
Dec 19, 2012
113
10
18
Vermilion, Alberta
I hear ya. My stock tires are too big with a 5" drop up front. Rub pretty good with passengers and turning. Was gonna do the NorCal fender mod but I think I'm just gonna run smaller tires soon. If I get 22's I'll most likely run a 285/35
 

dszx13

Well-Known Member
May 28, 2014
5,500
1,610
113
34
minden, la
Question
When I put the flip kit in the rear. Do I cut the bump stop off or cut the whole mount off. I wanna put helper bags in but won't be for awhile
 

DeanH1290

Well-Known Member
Jan 20, 2014
4,931
410
83
33
Georgetown KY
Question
When I put the flip kit in the rear. Do I cut the bump stop off or cut the whole mount off. I wanna put helper bags in but won't be for awhile
Cut the entire bracket off, there won't be enough room with it in there.

Sent from my SAMSUNG-SM-N920A using Tapatalk
 

dszx13

Well-Known Member
May 28, 2014
5,500
1,610
113
34
minden, la
Ran into a problem. Wheel won't go on. Hitting the lower ball joint bolt. Already cut it flush with the bolt
25a4cfda8a6478bbdf277e4b4c697c48.jpg