Ridetech coilovers FS and a bunch of other NBS lowering parts HI

F

FTC

Just a dumb welder
Dec 18, 2012
133
0
0
40
Hawaii
Selling my coilovers, don't need them and can't ever go back to static anymore anyway. These came off my RCSB, they are 800 lbs/in spring rate and I believe 24 way adjustable shocks. Only about 4 months old, black stuff you see is anti seize. These coupled with mcG 16+ spindles and FFR heim tie rods was by far the best static setup I've ran(I've also been through DJM arms, cut springs with spindles). Only things I would replace are the delrin upper shock bushings and the snap rings just for peace of mind. Spindles, Djm arms and tie rods are also for sale but don't have pics of those yet.

Coilovers $550 shipped(cost me around $800 new)

McG 16+ spindles already ground for better turning radius and tie rod hole is drilled out to 5/8" for FFR heims, these will also need a new control arm spacer/hardware. Otherwise they will be 1" drop. FFR heim tie rods. Need these to go as a package $375 shipped

Also have Djm 4" control arms but I think shipping wouldn't be cost effective at all for these.

3e85d46dd4473181c2161bdb531195c9.jpg


b1344c11beecfd927953bed46a2c04eb.jpg


7a8356ab202058f7932873234630f62f.jpg


4ff8363479b659c9f421c485286128ff.jpg
 
Someone could have a nice front setup. Basically everything I have. Except tukn4s heim and adapters from him so no drilling.
 
I'm honestly not sure, I want to say somewhere from 3.5-4". You would have to call db rods, they are made by ridetech for them.
 
Yeah must be 3.6" then cause my assumption is our trucks have about the same amount of travel.
 
I'm fairly certain they could go to about 5" drop on coilovers alone, cause with drop spindles I had them set about 1" from the top. With another 3-4" to go lower.
 
I'm not quite sure but I think 5" would max the shit out of them. I was around 6" total with drop spindles. I guess it is possible. But the ride would be terrible imo. Maybe a longer spring? What length are your springs? Mine are 8".
 
I've got 8" springs, yeah I wouldn't advise running them at 5" but could be done if needed.
 
FTC said:
Selling my coilovers, don't need them and can't ever go back to static anymore anyway. These came off my RCSB, they are 800 lbs/in spring rate and I believe 24 way adjustable shocks. Only about 4 months old, black stuff you see is anti seize. These coupled with mcG 16+ spindles and FFR heim tie rods was by far the best static setup I've ran(I've also been through DJM arms, cut springs with spindles). Only things I would replace are the delrin upper shock bushings and the snap rings just for peace of mind. Spindles, Djm arms and tie rods are also for sale but don't have pics of those yet.

Coilovers $550 shipped(cost me around $800 new)

McG 16+ spindles already ground for better turning radius and tie rod hole is drilled out to 5/8" for FFR heims, these will also need a new control arm spacer/hardware. Otherwise they will be 1" drop. FFR heim tie rods. Need these to go as a package $375 shipped

Also have Djm 4" control arms but I think shipping wouldn't be cost effective at all for these.

3e85d46dd4473181c2161bdb531195c9.jpg


b1344c11beecfd927953bed46a2c04eb.jpg


7a8356ab202058f7932873234630f62f.jpg


4ff8363479b659c9f421c485286128ff.jpg
Click to expand...

Still have the coil overs?
 
You must log in or register to reply here.
Top Bottom
Back