Project ITDROPT

ITDROPT

New member
Jan 23, 2011
190
0
0
Denair, CA
It's time I put up a thread with pics of my project back up on the site. I'm sure most of you will recognize it. So here are the pics starting from day 1 to how it currently sits.

October 2002
4.jpg

3.jpg

2.jpg

1-1.jpg

5-1.jpg


Moldings were gone within a few days.
6-2.jpg

7-2.jpg

8-1.jpg
 
In June of 2004 I took it in to get a 3/5 drop which looked more like a 2/4. By then I had the SS front bumper, cleared headlights and Escalade door handles.
5.jpg

6.jpg


Then in July of 2004 I had bagged with KP cups up front and a KP 4 link with the bags over the axle in the rear.
15.jpg

14.jpg

13.jpg

9.jpg

7-1.jpg

beforebodywork.jpg
 
Everything was cool until 2 months later in September when someone thought it would be cool to hit me while I was leaving a Carl's Jr drive thru.
damage3.jpg

damage1.jpg

damage2-1.jpg


So I had the damaged door replaced and door/tailgate handles shaved plus a roll pan welded in.
P1010003.jpg

6-1.jpg

7.jpg


A few months after that a guy loses control comin down the street and the truck gets hit again.
P1010001.jpg

P1010003-1.jpg
 
Damn man this truck has been through some shit, definitely in its best stage now(not that it ever looked bad)..looking forward to seeing the trenz on it