Need wiring diagram

Cheeny23

Resident Wop
Staff member
Jan 8, 2011
6,615
336
83
Bakersfield
was too hot for me to keep dicking around with the 40million oem plugs and wires, so if anyone happens to have it, please post it up

need it for:


2013 crew cab, 6 channel bose (non-luxury is the 6ch, where as lux is the 9 channel) with nav.


ive cut and tapped into the normal color speaker wires but if you bypass the oem bose amp, those are dead, so im assuming there are summed outputs off the factory HU that go to the bose amp, on plug C3, as the outputs i found from testing are all from the larger gauge wire from plug C2.
 

Cheeny23

Resident Wop
Staff member
Jan 8, 2011
6,615
336
83
Bakersfield
yea, i looked through that before, doesnt match up to the plugs on the bose amp. i think i found the table i was looking for, will post up if it works. stuff in red is what i was needing, this would be coming from the main harness into plug C3 on the bose amp, all small 22 gauge wire. they had it all bundled together, but the bottom stuff is separate and goes straight to the sub



FUNCTION PIN WIRE COLOR
RSE Remote Enable 17 WT
Left Front Input - 18 D.GN
Right Front Input - 19 OG/BK
Left Rear Input - 20 BN
Right Rear Input - 21 TN
Left Front Input + 26 TN
Right Front Input + 27 L.GN/WT
Left Rear Input + 28 BN/WT
Right Rear Input + 29 D.BU
Amp Remote Input 30 OG

Constant 12 Volt 33 RD/WT (?? not sure if actually in that plug, only remember 10 pins, but will check)

Left Sub Output - 34 L.GN/BK ²
Right Sub Output - 35 L.BU/BK ²
Chassis Ground 37 BK
Left Sub Output + 38 D.BU/WT ²
Right Sub Output + 39 D.GN ²