Moser rear end cover bolts

Samuel6731

Cant Get Right
Mar 11, 2012
674
1
0
New Roads La.
So after breaking the rear end 3 times I'm going to do everything I can to help it out.

I will be ordering a mosor cover soon. I heard the bolts that come with it are to long and won't tighten all the way.
What are people doing about this?
Cutting them? Or just buying new ones but shorter?
Or do anyone have a link to the proper ones?
I think bgrey is running this cover.
 
Hey man

The bolts are the wrong pitch, you need new bolts all together. lemme look and see if in my thread i made remark on what pitch they are
 
yah sorry man, dunno. Remove the top bolt from your cover, and go match it up at the hardware store. I believe its a standard thread. Wait till you get the cover tho, as the moser plate is much thicker then the oem one on the mating surface. You'll need a torque wrench that can go below 20ftlbs for install and setting of girdle bolts
 
Thanks man good info.
Not doing install though.
So your saying basically I need one that is the length of the factory one plus the added thickness off the Moser cover (because the factory cover is paper thin anyway to measure)
And of course the same thread.