Malikk Loftis

Active Member
Jun 15, 2014
305
90
28
f7e65f1c096453cfe481e514798169a1.jpg
d849d36096cd675472e47bdd96e4830b.jpg



Sent from my iPhone using Tapatalk
 
  • Like
Reactions: Alecks and dszx13

Smith

Super Moderator
Staff member
Jan 28, 2011
7,167
398
83
Louisiana
Niceeee!....wish my nova wasn’t an hour away at my dads, I’d work on it here and there 2 hours at a time like that lol


Sent from my iPhone using Tapatalk
 
  • Like
Reactions: Malikk Loftis

Malikk Loftis

Active Member
Jun 15, 2014
305
90
28
Been walking away from this thing working and living life wrenching on it when i feel like it lol. Decided to swap to ls3 heads and cam for the blower.
037e248900117135d6b7527bd64010ae.jpg
3b2a913a06780991a3e38f401cc2b825.jpg


Had a 4l80 built with billet shafts and a shift kit done in February so that left the read end being the last weak link/the only thing that hadn’t been touched. Took an 8.8 to get narrowed by a chassis guy was plan was to be just narrowed with moser axles and a girdle but opened it up to find that it needed rebuilt. The fluid looked like it never had the fluid changed. So we decided to go with a better unit instead of rebuilding
24b8c00af8592f24124df6e4ab968ebd.jpg




Sent from my iPhone using Tapatalk
 
  • Like
Reactions: Tylers88

Malikk Loftis

Active Member
Jun 15, 2014
305
90
28
Went to put the accessories on for the blower and the brackets i ordered didn’t fit so i bought an lsx concepts race drives with billet pullies it’ll end up putting the blower on its own belt.l and allow me to run what ever lower pulley i want. Just been ordering parts watching them come in
https://www.lsxconcepts.com/product...drive-high-mount-accessory-drive-kit-complete
d640ed53fbbab1d33ca9c3e7fc653d79.jpg

Ati balancer with dsx 9.06 lower
1dd3c85cdfa149bb7753cb895d86d1a8.jpg

Flex fuel sensor
0c1ce029818b586218e01f9ce820652d.jpg



Sent from my iPhone using Tapatalk
 

Malikk Loftis

Active Member
Jun 15, 2014
305
90
28
that thing fits in there perfectly

It’s a tight fit lol cut the center of the frame and made a crossmember still had to pull the drain plug on the Holley pan to get it in
b6b23f355c4c507cbb9b00fb99f9a8c9.jpg
922876dece790050ae7b2127d12a93a9.jpg
played it and ran tubing straight across to the other side
37f595c0e19b3d1985b75a1ba4ff824b.jpg
planned on running low mount ac but the brackets i had for the blower hit my power steering box so i bought the race drive and it came with high mount ac


Sent from my iPhone using Tapatalk
 

Malikk Loftis

Active Member
Jun 15, 2014
305
90
28
2cc60adee1579ce239bd823bd8f22568.jpg
water pump showed up so i three the rest of the drive on. Pinning the crank in the morning and running some lines to start putting this thing back together


Sent from my iPhone using Tapatalk
 
Last edited:

Malikk Loftis

Active Member
Jun 15, 2014
305
90
28
Pinned the crank so i could measure the belt for the blower drive accessory drive came with one

2a0902692ba96fbe5b47cd0f53aeafcc.jpg

3c9fa768c3d1cb3fb2e753fcd0026d5f.jpg

5439012b77584520429fb3dbd8537625.jpg

Sent from my iPhone using Tapatalk
 
Last edited:

Malikk Loftis

Active Member
Jun 15, 2014
305
90
28
First time having both my girls together lol took the truck from my shop to my dads so he could help me wiring everything up. Literally hate wiring lol
a21d5ac65c62596c0220028c9faa6583.jpg
5d7f7739b1d11ec836c19bc295f1dcdc.jpg
ea41760533fb9a92b215b46a7fb4b40c.jpg



Sent from my iPhone using Tapatalk
 
  • Like
Reactions: Oktain

Malikk Loftis

Active Member
Jun 15, 2014
305
90
28
I love where this build is going. Keep it up man

Thanks man been kinda an off and on deal hoping to finish up soon been hard getting in the shop when there’s other stuff I’d rather do lol


Sent from my iPhone using Tapatalk
 

Oktain

Canuck Admin
Staff member
Feb 9, 2012
4,965
224
63
33
Sudbury, ON
Thanks man been kinda an off and on deal hoping to finish up soon been hard getting in the shop when there’s other stuff I’d rather do lol


Sent from my iPhone using Tapatalk
Understandable. It's not like building this truck is your day job, and you do still have a lift outside of the shop.
 
  • Like
Reactions: Malikk Loftis