Khaos' RCSB Thread

Well if I have you on snapchat you saw it first.

Got everything buttoned up today. Loaded the tune, primed the motor by cranking it a few times with the coils and injectors unplugged, and fired it up.

Let it idle up to temp, checked the vitals, logged the whole thing, drove it down the street and back. I didn't get into it but the tune feels smooth and the new clutch components are like butter compared to the old stuff.

Super happy with it this far. It chops up nice and sounds badass.

Here's some pics and a video:


3d059ef65a362754b5da46dd65be6b30.jpg
40aa883ea1f4f678c479fe43711012cd.jpg
f36c298aa83a0f4760d852cc3d92ad44.jpg
 
Richard sent back an email about the log I sent. Fuel trims are off by 50% at idle. But it didn't seem to run weird at all. So we're gonna try and track that down and get that in check.
 
The other day when I hooked up the battery to pull the tune the hvac fans were blowing. So I pulled the fuse and said I'd figure it out after I got the motor all done.

So doing some quick read I found that the blower motor resistor can cause it to blow even with the truck off. So to Amazon I went and order up a new one. Swapped that out today in between sending logs over to Rich.

4a27a904434148912baa728a71348fd7.jpg
 
  • Like
Reactions: BigBlue02HD
Put about 50 miles on it today driving around logging. Rich has been super fast with revisions, I got 3 revisions in a 6 hour span today after sending him logs. Unreal.

Should be just about done with the VE table after this last log. Hopefully get the MAF portion done tomorrow!
 
Looks awesome man...there was a recall for hvac resistor and harness on those trucks when I worked at gm

Sent from my SM-G920V using Tapatalk
 
  • Like
Reactions: Khaos
Looks awesome man...there was a recall for hvac resistor and harness on those trucks when I worked at gm

Sent from my SM-G920V using Tapatalk
Thanks man! I'll keep that in mind. Hopefully just the resistor keep it going for another 13 years lol
 
Thanks man! I'll keep that in mind. Hopefully just the resistor keep it going for another 13 years lol
No problem. They were burning out like crazy. But I left gm 3 years ago now so not positive but still have ppl at gm

Sent from my SM-G920V using Tapatalk
 
Yeah.... Our 05' Yukon did the same thing yours was doing.

Bosses 05' LLY actually caught fire right in front of us in our shop parking lot. Luckily we smothered it out. Resistor shorted/overheated, plug end melted, melted coating off wires and hot wire fused together with rest of harness. It became a hot glowing ball which ignited dirt/debris/random little papers that had fallen from glove box area down into that hvac cover. Melted through the foam insulation on back of hvac cover and through the cover. Dripped hot molten plastic onto the carpet and floor mat. Crazy!
 
  • Like
Reactions: Tylers88
Glad to hear it running. Kinda gets me a little motivated for mine lol we'll see. Also went through same shit with my truck couple months ago with the blower motor resistor
 
  • Like
Reactions: Khaos