Hyundai YF F24 GDi (Slow Build)

I wasn't able to get the trunk lip spoiler installed only because I didn't like the way it was going to screw into the trunk. Anyway I ordered some heavy duty 3M tape and the special adhesive promoter... it's the same stuff everyone e uses on the car forums without problems if done right. The roof spoiler is held on by the same stuff without problems and it cost a bunch more than the trunk spoiler.

d4c941a8d45dcbb2e926505d222e264b.jpg


de9d392bbeadf66119905c9edab93b3f.jpg


cab84755c98442111eed10ba9d6fb4bb.jpg


dde9287bc874dbd02fd3d64124412aa4.jpg


ca42a1cb0b7150f9868db95b980da4f1.jpg


446015e514f260220a8fd9369c72deef.jpg


Should have everything including the roof spoiler by next weekend so I will install it all then....

Sent from my Samsung Galaxy S5 using Tapatalk 4.0
 
Finally got it all installed yesterday afternoon. Ran out of 3M tape but found some more at a store near me to finish it. The trunk spoiler isn't flush 100% perfect but you can't tell unless looking very close and I'm ok with that... the roof spoiler couldn't be more perfect it was easy to line up and once it pressed down it was on place.... glad I had chad to help me line it all up though cause otherwise it wouldn't of turned out near as perfect.

5662085d2582faf6c49227fd307007b5.jpg


23b49e11efa162262a5b0741936f5f80.jpg


bc1a5cda0e3189c6dccbd081285315bd.jpg


a579f397959c770fc8a33269b35a6a21.jpg


5a28ea3243fb22dbfa5cd1764516c34e.jpg


acda960d425fe2998057e9da8e9dc875.jpg


a7f1eb4421f201c29c206d4955047e79.jpg


dca05e379885337bc3a3661cdf44f829.jpg


1da0cc4280225137b701fac0ea9acc54.jpg


ff35fd3944809cb8e5bcb542294639ea.jpg


Love the carbon fiber and can't wait to get some more stuff on the car that is carbon fiber.

Sent from my Samsung Galaxy S5 using Tapatalk 4.0
 
Last edited:
Also forgot to mention that Saturday night after me and a bunch of others went out and we're doing what we normally do. Well we ended up in a empty grass parking lott behind a bunch of buildings and my buddy decided to do some donuts well it wasn't grass it was all rocks. Anyway long story short he busted my windshield and chipped the driver side door and back window.

453f104a454724cf651fc3ed4589971f.jpg


But he's paying to have it fixed so it's no big deal, just glad I haven't had the windows tinted before this....

Sent from my Samsung Galaxy S5 using Tapatalk 4.0
 
Last edited:
I'm wanting some type of liscenes plate frame because it looks so bland right now and I found this one from Seibon that's carbon fiber and thought it looked pretty good. Thoughts & opinions?

081a74bb0103cafeb0afe9ba01f5bc62.jpg


48d953450d02bbf2a435ad8cba4f4b85.jpg


0b690612c9a4cc48ba62711512987805.jpg


Sent from my Samsung Galaxy S5 using Tapatalk 4.0
 
That's what I was thinking.... and the little bit of chrome left on the car doesn't have much longer to stay around plan on having the paint work done once I get back from our long trip in FL.... plus I plan to have a carbon fiber front splitter and carbon fiber door skirts later on so it should all flow together good.

Sent from my Samsung Galaxy S5 using Tapatalk 4.0
 
That's what I was thinking.... and the little bit of chrome left on the car doesn't have much longer to stay around plan on having the paint work done once I get back from our long trip in FL.... plus I plan to have a carbon fiber front splitter and carbon fiber door skirts later on so it should all flow together good.

Sent from my Samsung Galaxy S5 using Tapatalk 4.0

Do you need 1 or 2 plates where u at


Sent from my iPad using Tapatalk
 
GA is only rear plate... and this car never had a front plate installed thank god so no holes in bumper. Also the windshield is only $192 installed so that isn't too bad. Now to just have it tinted after that....

Sent from my Samsung Galaxy S5 using Tapatalk 4.0
 
Last edited:
Jsyk, plate frames are not legal in GA AND they're ugly. Rock the clean look
 
Jsyk, plate frames are not legal in GA AND they're ugly. Rock the clean look
If I get pulled over and ticketed for a plate frame then I'll be thankful when I get done... it just doesn't look clean to me right now. I think it will look real boss once I get the custom plate I want and it painted.

Sent from my Samsung Galaxy S5 using Tapatalk 4.0
 
I mean 99% of cars come with dealer liscenes plate frames... and how can they complain about it covering county if so many don't even have county anymore it says "In god we trust".....

Sent from my Samsung Galaxy S5 using Tapatalk 4.0
 
When I registered my truck up here they told me all the plates have the county name by default but I could have a "In God We Trust" sticker to go over it. Told her the county name was bad enough lol.
 
That's what I'm saying... why can't it just be blank. They're are places around me you get pulled over just for being out of county. Should level the playing field and just leave it bare..

Sent from my Samsung Galaxy S5 using Tapatalk 4.0
 
Agreed, back home none of the parishes were on the plates. The standard plate just said "Sportsmans Paradise" like these.

la06.jpg



Trucks and specialty plates were different though.
 
I want damn Texas plates. Best looking IMO black & white without bullshit on them... Tis why I'm going to have the car plate painted same white as car and have letters put on it back in black. Already talked to a bunch of officers and they said as long as all the right decal are put back like they should why would they care what white it was painted with.... if I get in trouble I'll just have another tag waiting to put back on it.

Sent from my Samsung Galaxy S5 using Tapatalk 4.0
 
4WD status.... needs low so bad. Could do it cheap but would rather wait for coilovers & or bags... it will be bagged in the end but not sure whether to do it all at once or just do coilovers to get by before wheels. I think it will look like a donk if I put the 20's on it before lowering it alittle.

26d58a79b7b3b442c116073769b8dada.jpg


Sent from my Samsung Galaxy S5 using Tapatalk 4.0