Oct 16, 2011
4,621
3
0
SoCal
I keep one box of each size of the flat rates at the house just for sizing. Step up your selling game

u finna eat dem words bruh....troka rear seat is full of usps boxes :crossarms: pics in a few as proof too

have the usps variety pack at home, just never thought about them possibly fitting :roflfp:
 

Blue97

RUNSWITHBEER
Oct 13, 2013
66
0
6
So I know I'm bringing this back from the dead...... but just want to get this right..... if I add the b/j spacer, it will give another inch of drop. So a 2" drop spindle and b/j spacer is 3" drop...?
 

Jared

Administrator
Feb 8, 2012
20,572
117
63
North Dallas
Correct. They are 2" drop spindles when done correctly. Or if you flip the ball joint it's 1" I ended up flipping mine after the coilovers because it was just way too low and I didn't want to Max the coilover out.
 

Blue97

RUNSWITHBEER
Oct 13, 2013
66
0
6
Could I add a 2" drop spring with the spindles and leave the b/j alone for a 3" drop....
 

Blue97

RUNSWITHBEER
Oct 13, 2013
66
0
6
One more ?, I've got the 16+ kit . So If I get the 17+ spindles I don't have to move the balljoints...
 

Blue97

RUNSWITHBEER
Oct 13, 2013
66
0
6
From what i read over on gmfs, the belltech spindle won't lose turning radius... I've already replaced my upper and lower control arms and really don't want to drill out the rivets on the b/j

Wish I researched this a Lil better before buying the 2/4 drop kit..

Thanks
 

BOO5TED

Resident Smartass
Jan 7, 2011
20,163
11
38
ATL
If you have the 16+ spindles, you could always sell them. That's the ones people want.
 

Blue97

RUNSWITHBEER
Oct 13, 2013
66
0
6
Yes that's what I will do Craigslist is probably the best due to shipping. Going to order the Belltechs from Summit. I want it all here so when I'm on vacation I can do it...
sorry , didn't mean to drag out this thread l but I really do appreciate everyone's input..

Thanks...