GingerCrew

Active Member
Nov 16, 2012
3,781
0
36
34
Just west of DFW
What's up fellas. Those who follow me on IG know the diesel is gone and has been replaced with this. I had my reasons...

This one is a 03, 4.8 2wd arrival blue, 3:73s yada yada

Day I picked it up
3309ec7ac7276d993ff660c4603cb950.jpg


Cleaned it up and swapped wheels from the 14 and got it tinted 10% sides 5% rear
f76678f9cbce395aad65d88850f21831.jpg


Got the 4/6 on with helpers
544076cdf754a19914f0e439e5ad4bf5.jpg
0b0753e3452ea8a3e446e4d79e7c2906.jpg


I have a few things at the paint shop just waiting to pick them up
 

Attachments

  • uploadfromtaptalk1433129183075.jpg
    uploadfromtaptalk1433129183075.jpg
    98.2 KB · Views: 37
  • uploadfromtaptalk1433129251054.jpg
    uploadfromtaptalk1433129251054.jpg
    74.8 KB · Views: 37
  • uploadfromtaptalk1433129295643.jpg
    uploadfromtaptalk1433129295643.jpg
    96.7 KB · Views: 39
Last edited:

GingerCrew

Active Member
Nov 16, 2012
3,781
0
36
34
Just west of DFW
howd the spindle install go?
The actual spindle... not bad, the damn LCA...F that. Drilling out ball joints can suck a big one. But I didn't want to spend more on new lcas. All the auto parts stores and online that I found were all riveted ball joints as well so it wouldn't have made a difference
 

GingerCrew

Active Member
Nov 16, 2012
3,781
0
36
34
Just west of DFW
yeah....LCA sucks mandingo penus. Did you grind on that spindle at all? any pics of that?
I did bit I don't get any pictures. I didn't grind as much as alot of people do. I put them in place and turned them side to side to see exactly where they were hitting, took about a half inch on both sides and my turning radius is fine