01 Sierra Build
- Thread starter billnewl
- Start date
Front drive-shaft is in, UCA mounts/OEM bump-stop mounts are trimmed to clear stock location shocks and more parts showed up today. Had just enough time to mount of the new tbar mounts/bushings into the tbar drops and temporarily mount one to the truck.
Can't wait for spring, so I CAN wash it. :emo:
I got some diff fluid or some kind of greasy shit on the side of the bed that had been there for a few days. It was driving me nuts, so I finally cleaned it off. Grabbed a micro-fiber, a squirt bottle and filled it up with car wash soap/water and took care of it.
I got some diff fluid or some kind of greasy shit on the side of the bed that had been there for a few days. It was driving me nuts, so I finally cleaned it off. Grabbed a micro-fiber, a squirt bottle and filled it up with car wash soap/water and took care of it.
Last edited:
next time you're waiting for parts get some quick detailer. lower the lift down a bit and wipe that bish down
Got the axle back today. Looks like it's almost maroon. Will be comparing tomorrow and possibly be taking it back to have it stripped and re-done in "chrome" with a clear. :facepalm:
Put on the compression struts, brake lines, get the axle back, put back together and put on.
Maybe PC it... The Michelin man has a penor drawn on with a paint marker :read:
Found out today they are 15x12's. :facepalm: Should I run 2" spacers or sell them and get 16's?