1. BuMpErS

    For Sale: Weld Racing Cheyenne 20x10

    I have TWO good Weld Chevyennes 20x10 6x5.5 bolt pattern. They each come with a weld flat cap. Wheels are in good shape just need to be cleaned up and polished. I can ship and accept payapl Asking $125 FIRM a piece for them plus shipping of coarse.
  2. R

    Rhoush 2006 z71 victory red ecssb!

    Well I never really post here just read a lot but decided to post one of my trucks here it is started out like this 2006 ecssb with 18x10 weld dunes on 285/60 nittos [/URL][/IMG] Things I have done: Color match Tint Leveled out Escapade handles Cleared oem lights Fully buffed and...
  3. R

    Looking for 20x10 Cheyennes

    Looking for 20x10 Cheyennes in a 6x5.5 could trade 18x10 weld dunes if wanted
  4. S

    Possibly to renotch or cut down 10"?

    Had a under bed weld in when first bagged then did 10"....back to static so looking at swapping to stock bed again. Can I cut down notch or need all new avs under bed? Sent from my iPhone using Tapatalk
  5. F

    Frosty's intro to fourm and build thread!

    What's up all.. Names Ben aka Frosty.. In La sport area.. 30 yo Rolling a nbs eclb Silverado 2500hd.. Mgs 7/10 lift with 3" body lift on 22s and toyo 37s.. My reflector scraper a 04 nbs ecsb Silverado 1500 Ls. Mgs 5/7 flip kit rear on 18 to drive at moment.. Plans to bag it on 26s and in the...
  6. Col 10

    For Sale: Weld chyenne 6's

    :feeler: 20x10 weld chyennes 6x5.5 with 285/50 cooper zeon ltz's. Tires have about 65-70% tread left and come with sensors. Wheels do have some blemishes and need to be polished. At this time I don't want to ship and prefer a local sale. I'm located in Houston Tx. Asking $1700. Will update with...
  7. Tiki

    Aluminum wheel polishing

    I picked up my first set of Weld Cheyennes a few weeks back that were in decent shape but needed some work. I proceeded to wet sand 400,800,1000,2000 before finishing off with my Makita 9207spc with a wool pad and mothers aluminum polish. These wheels are never going to be perfect and I was...
  8. Slow05CC

    Driveshaft Out Of Balance???

    For a while now I have had this vibration from 85-105 MPH. From 105-120+ its smooth again. After I lowered it I had the driveshaft angle all screwed up and had to get a larger degree shim. That fixed the WOT vibration and vibration from 65+. Now the only vibration I have is from 85 to about...
  9. Connor

    Ford Weld Typhoon

    16.5 weld typhoons, ford 8 lug pattern. 80 bucks. Could make a good flip. https://boston.craigslist.org/gbs/wto/5490623034.html
  10. GR$$N$

    17x10 welds

    8x6.5 17x10 weld racing wheels. great condition. i have 5. the spare is more of a 0 offset and also has some pitting. the other 4 are in great condition. will polish and get better pics. located in southern california. asking 750obo Sent from my iPhone using Tapatalk
  11. B

    Bagged 06 sierra crew cab

    For all of you that don't know I'm back in a crew cab. Plans for this one are straight to bags. Figured id go ahead and start this thread since I'm collecting parts. Got a York 210 and nfamus 3 link on the way. Rest of the plans include infamus front kit, raceline stunna 24x10 on 275 30 kuhmos...
  12. Connor

    Tiny dings

    I have a small ding on the side of my car, then entire blemish is smaller than a dime. It is noticeable in the black, however. What's the best way to fix it? I know I could fill with a little putty and paint it, but I don't want to do that. I've been trained to hate bondo, and want an all metal...
  13. justinghump

    The Old Man's 2500HD

    New project, which you guys may find more desirable than my truck, since us longed guys get no love here lmao... Updated 1/8/18 since Photobucket doesn't work anymore, here is an original picture of the truck in it's previous life as well as the reg cab before it's "makeover". I started this...
  14. M

    20" Weld Evo Axis wheels/tires

    Weld Evo Axis chrome wheels 20x9” 275/55/20 Yokohama Parada Spec-X tires Never driven in winter, never seen salt. Great condition. Includes lugnuts, does not include tpms sensors. Approx. 20,000 miles on setup. Approx. 4/32" tread depth remaining on tires. $900 obo for wheels and tires. $700...
  15. R

    Aero3030 and AFM

    I had the aero3030 on my nbs and really liked how it sounded dumped over the axel know have a 2011 with AFM and was wondering how it would sound or if there will be any issues with the AFM Sent from my SM-G900R4 using Tapatalk
  16. Cleanoh4

    Exhaust set up suggestions

    Like the title says, looking for suggestions. Cat back, S/I S/O, going to dump it right over the axle. Don't really want a redneck rasp, but a little drone is OK. Iirc factory piping is 2.5"
  17. J_Corr

    Weld in Front bag mounts?

    Was on MMW's web page as I am thinking of ordering their watts link and I was also going to order their front weld in upper bag mounts but it appears they no longer offer them? Hopefully it is just a glitch in their system, but if not, where else would be a good place to get set a pair of...
  18. A

    For sale: 99-06 Steel Roll Pan Silverado Sierra

    Modshop customs hand made in the USA roll pan. Weld in style. Fits great. Quality welds $OLD
  19. F

    Raised tranny crossmember

    99-06 GM TRUCK RAISED TRANNY CROSS MEMBER - AVS Is there anybody on here that is running this one or one simular on their truck? I just want to know if it's worth my time.
  20. Liamrk

    Liam's 2000 ecsb sorta build

    Alright so this isn't gonna be anything crazy but I'd like to post up where I started and what I've done as well as progress pictures and plans for my truck Alright so I bought the truck three years ago with all kinds of fun stuff on it, blacked out tail lights and headlights.. (nightshade)...