Im doing another custom restoration. Im putting twin 70mm ball bearing turbos on a Ls 5.3 forged steel crank cam and pistons with h-beam rods copper gaskets and titanium lifters and valve springs and im pairing it up to a allison 5spd transmission hooked to a full auminum driveshaft and factory...
Was killing time after work trying to go to sleep and decided to do the front end of my truck. Needs a few more coats but it's whatever for now. Just wanted to see it before I bought painted stuff. Was all chrome
Sent from my iPhone using Tapatalk
This will be a very minimal "build" and will be SLOW, basically some audio and maybe making it look nice.
So year I decided I wanted a work car, well had a very used Impala pop up locally. Pretty much fit my requirements of working heat and air and ran good, so I scooped it up for $1800. Its a...
Well finally I found exactly what i wanted and i jumped right on it. This will be a slow but steady build that i may change my mind back and forth on. Plans for now are listed below.
2006 4x4 QCSB Big Horn Edition 5.9 Cummins
Demold & Debadge
Remove steps
2.5in Level
3% Back 3 windows 10% on...
Trade for this 2001 ECSB Z71 not too long ago and plan on keeping it for a little bit so I figured I'd make a build thread.
This is how I picked it up.
6" RCX with steel 16" wheels and 285's
Got rid of the steel wheels in favor of some 17" stocks with 305 terra grapplers and cleaned the...
Ok guys, i ordered some traction bars for my soon to be installed performance goodies (check build thread).
Truck is Dark green.
I'm wanting to paint them to stand out but not in a way that contrasts to much with my truck.
Just wanting them sorta noticeable to those who know what they are...
http://customgm.com/exterior/5107-22-gm-steelies.html
ok been lookin at em and now I want a set, but cant friggin find em! I need help anyone know where I can get a set !?
I have a 2003 silverado, it sits a little higher in the back, stock suspension is on the front, only alter to the back is 2" drop shackles. What would be a cheaper, but not half-ass, way to lower the back about 2-3"? I don't want it to ride like crap either.
Thank you.
Everybody here knows the story of my silverbirch sierra. T-boned, smashed, fucked, blah blah blah. Well, i bought a roller to steal cab and bed from to rebuild it. and now, Im in a perdicament and have went back and forth, and think Ive finally made a decision
The trucks an LT3, Had...
As a lot of you have seen in various threads, I decided that having no debt wasn't fun at all, so I bought a second truck :laugh:
Specs:
2005 GMC Sierra Z71 with 152kmi
5.3 HO (L33)
4L60E
4x4 with Auto Tcase
3.42s :nono:
G80
HD Trailer Package
It's a strangely optioned truck for sure. Auto...
Welcome to CustomGM.com!
At CGM we have these simple rules. Please abide by them and enjoy your stay.
NOTE: Staff at CustomGM.com reserve the right to amend the rules at any time, as necessary.
Rule 1: Racism and homophobic slurs
Absolutely NO racism or homophobic slurs. Such remarks will...
Don't really have a build thread for my truck.. It's been 3 years with the thing and gone through a lot of shit. Started of course stock on 20" VHO's and just went from there. I'm not going to post anything from what I've done in the past on here just from now on lol. Here the most recent pic of...
So I've seen the thread on gmfs on how to do the visors, everything went good when wrapping them till I got to gluing them together. They just won't stay closed with hot glue. Tried plastic epoxy and still nothing. Y'all have any ideas?
Sent from my iPhone using Tapashit
I think the gay80 is about to go out in my 1500 and I don't know shit about gears. Any help/advice is appreciated. I will be running around 275/60r/20 (33X10.8X20) tires soon and they will be more mpg friendly than my mud graps. What gears (if any) will help my mpg's and be good for around...
Tools needed:
Electric hot knife or dremel
7MM Socket + Driver
Cabin Air Filter
Retrofit Door (can be purchased through us)
First Remove the passenger side kick panel by remove the 2 7MM screws.
You will notice an area to the left of the blower that has a flat surface. That surface you need...
auto
bagged
bagged00
black
cgm
change
cheeky
chevy
clear
facepalm
filter
funny
gmc
interior
led
pictures
post
replace
sierra
silverado
stock
tire
troll
truck
word
Post your burnouts videos and pictures.
Whether it's a one tire fire, spooled, awd, post it.
It can be a DD, a Sunday driver, a bike or even a moped. Whatever floats your boat, lets see some smoke.
Sorry for such shitty video quality
http://youtu.be/7wbhvqb-HLM...
33's
awesome
balls
build
facebook
gmc
grand
grill
leveled
lowered
pictures
post
stars
stock
swap
tire
tires
trans
troll
truck
vette
video
wheel
wheels
yolo
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.