tire

I'm really liking 22/33 setups and I've been kicking around selling me 20" forces and 305 Toyo ATs for 33" Toyo MTs and 22" Fuel Kranks, throttles, hostages, or gear big blocks. Thoughts? I can pretty much break even Pic for reference as it sits. Sent from your sister's house

Hello everyone, Just picked up a black one and really thinking about a leveling kit with some new tire. I have not done this before so just looked nag for some insite.

88GMCtruck's 98 Silverado Towpig Build: "Black Fox" Since I recently joined and recognize some faces I haven't seen in years, figured I would post up some backstory of my Dually. After looking at duramax trucks and not wanting to spend as much, I decided to go a different route. Here...

There is prolly already a thread that answers my question, but I've searched and searched with no luck. Only info i could find was on slammed or lifted setups. What I need to know is what tire size I should run with 24x10" 31+mm offset texas edition wheels on my 08 sierra ccsb with 2" drop...

I have a full set of 2015 denali hd wheels and michelin tires. They have 5200 miles on them. Basically perfect condition. Located in simi valley,ca. Asking 1800obo. Willing to ship on buyers dime

Wondering if someone can do a quick chop so I can see which set of wheels I like better on my nnbs. Still have no idea what I wanna run for wheels but wanna do 22s or 24s and was leaning towards dub futures or tbss reps with a machined face. My turd Wheel choices so far

Right now my truck is at like 5.5/8 drop and I'm running a 245/45r20 up front and it rubs pretty bad. I'm minitubbed and all..still rubs. Looking for insight for a proportionate looking smaller tire. Considering going with a 275/35 up front..but I think that small of a sidewall will look stupid...

Most of you know I scored a set of NNBS GMC 20s...didnt see anything on here on how to declad, so here we go. I started off with these wheels, doesnt matter if you have the same ones I do or the other clad version, theyre the same wheel underneath. "Other" rimps...again, wont matter as long...

Looking for aggressive all-terrain tire options. 285/?/17 I will probably stick with the stock wheels for now. Toyo Open Country Nitto Terra Grappler Mickey Thompson ATZ General Grabber Red Labels ?

I have a 2005 Sierra Crew Cab bagged with ART coolride front setup with lower arms and ART AirBar in the rear. I need advice on what shocks to run in the front. I had the ART RQ shocks, but they are no longer usable. Set them too stiff and destroyed them. I also need advice on what size tire...

Selling a set of 24" bonspeed wheels with Toyo tires. The wheels are (2) 24x9 & (2) 24x10. Tires are 285/40r24 all around. Unsure of offset at this time but they will not tuck in the rear with factory width axle. I believe tpms sensors are installed but I am not 100% sure. Wheels do have minor...

Well, I bought my first new truck and it ended up being a Ford this time. I wanted a diesel bad, but I just have no use for one. I really liked the Ecoboost engine and decided to go with the F150 and I have to say they are pretty damn awesome. I also have a 2015 GMC Sierra SLE work...

I just got a new truck today, its a 2001 gmc sierra rcsb 2wd 5.3. This will be a very slow build, but i just figured i would throw out what i have planned for it and get some opinions and what not. I will also get more pictures soon as i only have one for now. As of now the truck has 2" drop...

On my '08 I've dealt with a hyperflash problem on my left turn signal and it all started after I had bodywork done on both sides of my bed a few years back. I've just lived with it this entire time. I swapped in new bulbs and if I remember correctly, one of the bulbs doesn't light up when brakes...

location: Paducah, KY Belltech 2" drop Spindles Belltech 4" Rear Springs Belltech 1" Rear Spacer to get 3" rear drop Belltech Rear sway bar end Links Belltech Shock Extenders McGaughy Strut coil collars with two 1/2" spacers Drop kit allows for 2",3",3.5",or 4" total drop in front and...

What is up everyone? I'm krash and I have a 2011 Silverado with a few engine mods and suspension mods. I'm from the Dallas area and I am the owner of "Southern Hoedown" truck show. I'm 26 and currently hate my job at NTB as a tech.

So I'm torn between a 275 45 20 and 285 50 20. 45s will have gap rather than the 50 which will have less gap. 50s will look a little sportier than the 45s. 45s won't have any rubbing, 50s might. What would yall go with? Truck is still at 4/7 with stock Yukon Denali wheels. Guy I was...

Have a complete seat of light gray/pewter seats out of a 2005 suburban, and the complete center console. Front buckets, drivers side power, middle buckets, and 3rd row bench. In good condition, front 2 seats have small blemishes that I've pointed out. Longview, TX couple hours east of Dallas...

Looking to get some new 265/35/22s, put approx 8,000 miles on my truck the last 8 years. 5-6 year old Hankooks I sold were like brand new. I can get lionhart a for $500 mounted balanced...how do you like them? Sent from my iPhone using Tapatalk

I have a 05 Silvy Crew! Right now I am riding on stock suspension with shackles out back on 285/50/20 toyo proxes ( which by the way are the worst tires I have ever bought. ) and 20" Centerline wheels. We have figured out the wheels "should" tuck, if not I will use my Texas Editions that are...