spindles

Been looking into dropping my truck 01 silverado ext cab. Really want to go 7/11 but don't know what's the best setup. Can yall help

Lemme know what you got. Truck is 2wd with torsion bars. So can be 2wd or 4wd spindles but can't be mcgaughys 16".

Has anyone tried this kit? This kit is a 2/4 drop but it has a flip kit already. I would love to hear opinions on it. I'm rooting for it because after it, it'll be so easy to drop to 4/6 if the 2/4 isn't low enough.

So just got my 4/7 and ready for alignment, I remember when they were $60 but been calling around and $89-$120!!! Wtf lol I also have spring spindles in front and flip in back. Any shops give you a bad time about alignment? Had one quote $60 then say that's for a "basic"...

Hi all, this is my first post on here and this is gonna be a two part thread. My first question was I wondering if anyone has experience with these ARC 12000D switch panels. I'm going to be using it with the 20 circuit system from InfinityWire. One of my questions is with using the 20 circuit...

Ok guys I'm new here and need some help. I've got a 2011 Chevy Silverado crew cab that I'm wanting to lower around 4/6 and trying to avoid notching the frame. I've seen several different kits and lots of forums on this subject but they're all a few years old. I'm looking for more up to date info...

New guy here posted a Hey what's up thread now I figured I would post a build thread. Not a full size so idk how much interest this will drum up so we will see :laugh: Bought my blazer December 1st 2014 after selling my bodied 03 S10, my 2000 Xtreme S10 and retiring my beat up 93 S10 ( See a...

Well I said I wasn't going to start a thread but here I go. Probably more just for time line than anything. Won't be anything real special just a daily that doesn't look like every other truck in town! Started today with prepping for the arrival of parts! I took pics but apparently I don't have...

I picked up this truck at the end of last year. Been poking around fixing what I can, and keep coming back to the sway bar. Its running drop spindles and cups in the front. The bolts for the original sway bar hold down are still in the frame rails. I'd like to get a sway bar back in...

I currently have 2 in drop spindles on the front and the 2in shackles on the rear with block removed.Im thinking of putting on a set of 1in drop springs with the spindles up front and was wondering whats the best to do for the back with no notch?wanting it down another 1in in front and 2 in...

Hello! I have read pages and pages of threads to the point where I am more confused than before I started. Here is what I have and want to do. 2005 Silverado 1500 crew cad 2 wd with 1 piece aluminum drive shaft. I have decided to go with the Mcgaughys 5/7 drop and run a 22x9's wrapped with...

2012 gmc Sierra 1500 crew cab Front 2" spindles 2" springs Rear. 7" flip kit with belltech street performance shocks. I had a 4"/5" drop and it was even. Now I wanted a 4/6 I lowered it and now my truck is not even. From top off fender too top of tire On the front driver side I have...

Before: ECSB Springs with 1" daystar lift spacer & shackles set on 2" ( you read that right!!! to sit level I had to lower the rear 2" and raise the front 1"... ) 285/50/20 After: 2" Drop Spindles with 1" drop ECSB Springs and moog Isolator ( factory height ) & Flip Kit out back set at 5"...

So this weekend I installed a flip kit on my 2005 crew cab Silverado! Looks insane, but has a vibration ( go figure right? ) I have a 3* shim in it right now and there is not vibration while city driving ( as far as I can tell anyway ) but there is a vibration at wide open throttle from...

Hey everyone I am not new to forums, or even nee to automobiles. Iv grown up and spent a lot of my time (and money) on cars. My grandfather used to drag race, and owned a machine shop. My father has been a mehanic his whole life as well. Its in my blood, its a passion of mine I hope to one day...

Probably going to lower my truck before it ever gets bagged. I'm having problems finding lowered nbs rcsb on 24s. So lemme see what pics yall have. Emphasis on rcsb and nbs as that's what I have and I'm generally not to crazy bout the way they look lowered on 24s.

I don't think I've posted many pics since I put the ss wheels on and lowered the rear a bit more. It's like 6/8 ish? Right now, havn't measured exactly honestly. Ridetech coilovers, mcg 17+ spindles, flip kit and 2 inch shackle in the rear. 245/45 in the front and 275/40 in the rear...

Assuming they are belltech since everything but the spindles are. Came with the kit I bought from dean and I dont plan on using them. Idk what they are worth so 50 plus shipping?

Thinking of putting a set of matte black rally stripes on my lowered two-wheel-drive Silverado crew cab 2011. Anybody have any pics of this they can share? There are two different styles, the wider ones that are set apart and the ones that are closer together that run more through the center of...

After lowering my truck I was just too stoked to pay attention to the ride quality or suspension geometry, but now after daily driving the truck at 5/8 for a couple months I've decided it could be better. I'm mostly concerned with the front as I know what needs to happen in the back. I know it's...