shock

  1. Adjusted

    99-07 Front lift shock questions

    I have a 2007classic 2wd Sierra with 3in RC spindles and 1.5in daystar spacers. The stock length front shocks have been on this setup for about 3 months and it is time to get something that suits the higher stance and the lack of the front suspension constantly resting on the bumpstop. I am...
  2. Khaos

    Khaos' RCSB Thread

    This will be a slow, budget-minded build until I am done with college. With that, onto the pictars. Sold my '01 1500HD in November because 1) I didn't need an HD 2) Gas sucked 3) I wanted something different 4) I owed on it Specs on the new truck: - 2004 GMC RCSB 2WD 4.8 5spd with 82kmi -...
  3. N

    2011 Esky... big brakes/big wheels/lowered project

    ff you guys know me you know I like modding my vehicles..... even if I don't have the truck yet lol. I will be using this truck to tow my ctsv to the track also so no 3600 stall or heads/cam or nitrous on this one just basic mods. We should be finishing up the paper work this week and truck...
  4. A

    Decided to give in to everyones Goading, dragged the crew and bum trucks along with..

    Bryant, Peyton, and several others have goaded me to join up, was trying to avoid keeping up with another forum, but, so far Ive really liked what Ive seen, by now Im sure everyone knows about all my pieces of shit...but Ill be here to contribute whenever possible. Current ride...LOL jk, got...
  5. B

    Badassblaze's 2006 Dmax DD/Tow rig build

    Well... Its kind of dirty from Barnwell so I don't have any current pics of it at the moment, but I bought an 06 CCSB Duramax :evil: . 4x4, LBZ motor, 6spd Allison, LT3 trim level, black exterior, charcoal interior. Bone stock other than the HIDs and Incubus 20s that are on it. Never had a...
  6. Dustin

    My custom exhaust

    So I got everything ordered and everything has arrived. Now it's time to weld everything up. But before I do that here is a pre post of the parts off the vehicle. Here's what I ordered... - 1 SpinTech Pro Street 6000 Series Muffler custom made (3" inlet 3 1/2" outlet) - 1 MBRP 3 1/2 to 5 inch...
  7. 02z71 Sierra

    Can I join the fun too?

    Hey fellas, yet another from GMFS. That site is crappy since everyone started leaving. I never was very active on that site maybe I can contribute more here. Anyway for those of you that don't know, I drive a 2002 Sierra with the 6" RCX NTD and 33's and had gotten a lot of ideas from you...
  8. James Pate

    De-Redneckification of Mr Pate's 03 Duramax

    Started off with this Went through many different stages but this is how it sits now
  9. B

    help me figure out my shock problem

    so heres the situation, i got the qa1s off the truck and was taking some measurements. Ride height measurements: axle travel until bottom out- 1.75-2" shock at ride height- about 15" shock compressed 13.5" shock extended 21" yall think i need a different shock? i know if my shock is...
  10. DirtyBlackHD

    2001 2500hd 8.1 SAS Build

    My new project: Sloane Peterson Specs are 2001 2500HD CCSB , 8.1/allison/3.73/LT, 90,000 miles etc. I was originally between a handful of vehicles to include 03-06 Ram 2500 Cummins, 2500HD with 6.0/8.1/duramax, and Avalanche 2500. I ended up looking hardest for 8.1 2500HD's because of the...
  11. 07blakchevy

    Newb from gmfs...

    Well I finally found where all you turds went, so I followed :sneaky: Heres a pic of my truck until I get some updated ones
  12. D

    Shift Kit How-To/Write Up

    See post #2 for disclaimer and credit. Intro. For all you guys wanting or wondering about how and what it takes to upgrade your 4L60E and 4L65E transmissions, this will give you an idea of what you will be getting into. Personally if you are mechanically inclined and have basic hand tools YOU...
  13. D

    Discussion: Shift Kit How-To/Write Up

    See post #2 for disclaimer and credit. Intro. For all you guys wanting or wondering about how and what it takes to upgrade your 4L60E and 4L65E transmissions, this will give you an idea of what you will be getting into. Personally if you are mechanically inclined and have basic hand tools YOU...
  14. C

    Sas 01 2500hd 8.1

    Well I am finally getting around to starting this thread. Ive been super busy working on this truck so I havent had much time to do anything else. A little over a year ago I had this: 2003 Z71. 6in procomp 3in body on 36in iroks. Pretty standard issue around this site I started...
  15. B

    My Trucks

    Gonna make a thread so everyone knows the specs, and It will eliminate alot of "Hey broski what size tire you got" pms. 1999 GMc Sierra RCSB SLT Engine LQ9 6.0 Flat Top Pistons Stock Bottom End(should have just bought a GM Short Block...idiot) Texas Speed Torquer V3 231/234 111lsa PRC Stage...
  16. B

    Just the tip

    Just wanna put my tip in, jsut to see how it feels...
  17. Half_Ton

    found my way.

    Yup, i'm here. CSB.
  18. DirtyBlackHoe

    Another Newbie

    Just wanted to say wassup...another newbie...from GA