led

I traded my 2006 for this 2013 back in February. Had a build thread on another forum but figured since I lurk here I'd post one here too. Mods so far : -6.5 kicker door speakers -kenwood ddx372bt headunit -factory style aftermarket backup camera -demoulded -cm rear bumper ends -cm bowties...

ok so i thought i had fixed the problem i had but i seem to come back every now and then and now it does it all the time. when i signal left the right LED flash slightly and left ones flash like normally when i signal right the left LED's flash slightly and the right ones flash normally...

Gonna be a slow pace seeing as how mom and pop don't fund me. But so far the mods are subtle. So far we have... 4hi mod Nbs 17s and 285s Rough country 3 inch kit (came on the truck) Crappy cheap aftermarket head unit (and so came with the truck) Led swapped marker lights My emergency...

Okay guys, I bought a used 03 SS with 117K, that is in immaculate condition other than the sad fact that it is having the battery drain issue from the IPC/DIC circuit. I did my research, and a draw test and found this to be the circuit. Will rebuilding the gauge cluster as most have suggested...

So here's the original thread, but since it was mostly BS and dreaming about what my plans were, I decided to start a new thread. http://customgm.com/under-construction/8881-sbm-sierra-rcsb-build-thread-sort-anyway.html OKAY. SPECS: 2015 GMC Sierra Z71 SLE 5.3L 4x4 3.42 gears...

As my first real truck purchase, i picked up a 2013 Chevy Silverado 1500 Thunder Edition. Looking for suggestions on the exterior, its my daily driver so not going too crazy. First thinking about a 2.5 inch lift so I can put a bigger/aggressive tire on it, along with some new rims. Thinking...

Hey guys new to the forum, just purchased a 2013 Chevy Silverado 1500 Thunder Edition. Have all sorts of ideas running through my head. I know my way around a truck but ive still got lots to learn. Going to start with a lift/leveling kit. Thinking 2.5 to 3 inches. Just enough to get itnoff the...

Looking to turn some heads when you drive your pride and enjoy through the city? Want a unique enclosure for your sound system? Look no further! Weve started a new company that makes custom fiberglass sub boxes and customizes headlights and tail lights. Want the back panel of your headlights to...

Here's a switch panel I had a friend make for me for the over head console. I had to use a console out of a Yukon since I had a sunroof. I just took the rear air control out and he machined a piece of aluminum to fit. Now im going to have him make one for my Nitrous switches...

Looking to sell my 2010 Silverado LTZ Crew Cab Short Box 4x4. Rebuilt Title. 141,000 KMS/ About 88,000 MILES (Canadian vehicle) Fully loaded with the exception of: Navigation, Sunroof & Sliding Rear Window Located in Toronto, Ontario, Canada Interior Leather, Heated, Power and Memory...

ok i bought some led taillights awhile back and when i installed them they worked great but over time i noticed the driver side would blink normal for a few seconds then start hyper blinking. the passenger side light does it to but not near as much. any ideas on wat it could be?

Just got me some 295/55/20 nitto trails. specs on suspension 3.5 rc lift. let me know what you think.

Got the headlights done without an issue. Had a hell of a time getting the turn signals apart, but eventually got it. Now how in the exact fuck does that amber piece pop out? Because I've tried just about everything I can think of.

I picked up a 95 Sierra last month it's got 3" springs in front the guy said, not really sure if they are though. The back has something I'm not familiar with that lowers the front leaf spring mounts to drop them, says its 4" in back and I don't think so.. I would like to put spindles on the...

Time for it to go, 2008 rcsb 4.8 LT model -4.8 with 78xxx -LTs, ORY, 14" magnaflow to 4" tip -TB stall -vette servo -air aid intake tube -custom tune(it is unlocked) -Tune says 3.73s but glovebox says 3.23s. Never cracked open to see. Runs round 1700-1800 rpms at 65 Interior -black...

Had some old offroad led lights laying around so figured i wanted to try and put the leds in my stock fog light housing. Let me know wat y'all think. led lights I'm using fresh paint and led mounted lens sealed back on - - - - - - - - - -auto merged double post- - - - - - - - -...

Soo traded in the 1500 for a 2500hd. So figured id make a new thread. Gonna be a slow project. im personally not a huge fan of the stack so i think exhaust will be first big thing. I need to do my ac controller and steering wheel with leds. As well as eveything else interior led. How hard...

2011, bought it brand new with 13 miles as a leftover in April 2013. I drove it lightly until 80 or so miles, changed all fluids, then set it up on jack stands and ripped most all parts off to begin building it. Here is what all it has. 2011 2012 seal kit 280 miles 70 hours Last 840 brute to...

Fits 03-07 Silverado, Sierra, Tahoe, Suburban and Avalanche. **No longer for sale. Located in the Bay Area CA. Willing to ship but buyer pays shipping They are smooth and painted Victory red. I installed hyper white LEDs in the puddle lamp. Works great. Has some small rock chips from...

My 4runner forums suck so im going to make a thread here with my continued "build". I figured it will be easier to make a build thread instead of blowing up random threads. When i just purchased it. 2003 Limited 4wd v8 94,000 miles It only took a week to take the steps...