intake

I picked up some low mileage ( 58,000 to be exact ) 243s off a Z06 this weekend and I had a quick question about milling them before I run them over to Texas Speed & Performance for some head work. I have been told that milling them .030 will retain the factory compression with the 5.3 dished...

New to the site so I decided I should post my truck build on here to get some ideas or advice on what to do. My truck is an 02 silverado 1500 bought it about a year ago now and I absolutely love the truck. The day I bought it, it was bone stock which is what I wanted. The truck being from MN had...

2012 gmc Sierra crew cab 4x4 Stuff I have now / all most ready for swap Ly6 6.0 block Lq9 flat top pistons Cnc ls3 ported heads Ls3 intake manifold 1 7/8 headers with 3" exhaust I'm still haven't decided on a cam/converter this is my daily driver/street truck I'm shooting for around...

I recently purchased a set of the FlexFuel Injectors PT#12580426 which I have read are about 36 pounders? I ordered the Racetronix EV1 Mini Delphi to EV6 USCAR adapters and plan on putting them in this weekend and getting a retune done. I know these injectors are more then I will need...

Has anyone ever used this onirrors, door handles bumper caps etc? Just curious if it's gonna blow off at the first hit of the power washer. Sent from my SM-G900V using Tapatalk

I have a 2014 6.2 with LTs/ory to a 22" magnaflow, airaid MIT with k&n drop in filter, and a KHP tune. After its been sitting a while, over night or during the day before I go in on nights, I can start the truck and it will pop through the exhaust. A pretty loud audible pop, now after 30 seconds...

PM me for the fastest response. I have some stuff that I took out of my old truck before it was traded in. Everything works great and has been well taken care of. Akron, Ohio. Pioneer Avic Z2. This has the 2010 model 60GB HDD instead of the normal 30 and has the updated maps. There is...

Sorry if I posted this in the wrong place, but I have a tbss intake I'm gunna put on my 5.3 and I wanted to know what kind of options are out there for the tbss cover? Does a newer Silverado cover fit? I'm just not a huge fan of covering the whole motor, I like to see what's under there and I...

As many of you know I'm now the proud owner of a 2015 GMC Sierra with the Direct Injection LT based 5.3L "Ecotec" V8. I've been doing some rummaging around the Interwebs about Direct Injection engines and carbon build up in the intake track and valves. Basically my readings only confirmed...

This is going to be a thread where I just post the same picture every week and complain about never driving it and cleaning it every time it exits the driveway

Posted below are a few pics of my truck. It has a pretty good bit of mods done to it! Performance and appearance... I get on these forums and see all these trucks and think to myself, why doesn't mine look that clean, or why doesn't mine look that nice. I don't get it! Is it just because its my...

Central WI Well Im finally breaking down and trying to clean the garage out... tons of parts to sell. D1sc procharger, air to air intercooler, truck bracket, belt, red race valve, intercooler plumbing, siemens 80 lb injectors, wideband o2, boost gauge, nnbs pillar gauge pod. Air aid air...

Sitting here with lots of nervous energy today and I realized I never started a build thread ( not that I've done a whole lot in comparison to some), plus I figure it'll give me a place to post up questions/things that wont get lost as easy. Details: 2004 Chevrolet Silverado Z71 - bought...

Decided to start a thread Current things I have done to it consist of 2.5 level 1.5 body color matched tows and tail gate Handel also black bumper caps black 13 grill with Billit bow tie 20x10 fuels and 295 toyo mt 15% tint all the way around with brow 20 in led bar in bumper slot and 5 k Hid...

Has anyone tried modding AIRAID MIT tube from a NBS to a NNBS Sent from my SM-G900R4 using Tapatalk

Hey guys! This is gonna be a thread to document the progress on my Sierra, it's called a bucket of mixed emotions because it's been up and down with this thing since the day I bought it. It's a 2003.5 ECSB 4wd GMC sierra work truck edition, it was a municipality truck I bought for 3600 bucks...

So I'm gathering parts to bag the crew cab. Will be on a 275 30 24. Trying to get ideas for tubs. Things are going to be tight under the hood as I'm looking to run a York 210. Really liking the tandem axle tubs that go flat against the firewall. Anyways post pics of what you got.

Some of you know I bought a LS1 long block and was looking at rebuilding it for my 2005 Silvy CCSB. After doing some reading and research I decided to get rid of it. I traded the block and crank for a 2002 5.3 block and crank, so I still have all the LS1 pistons and stuff. I have built many...

Hey guys, looking for input from fellows a little more knowledgeable than myself. I may be able to get a used L76 from an '08 suburban I believe and want to know what you all think is needed to make it work in an '02 truck? Looking to keep the original wiring harness and pcm from my truck...

I'm looking at doing some visual customizing of my truck and after doing a little research it appears I need some help and a good community to talk to. Even tho I don't live close to any chapters( I live in fl) I liked the site and the sheer amount of posts. I have a 2014 chevy silverado 4x4...