how-to

Ok so I finally gathered up enough balls to do my servo finally, got everything apart and put back together, on the last step and I cannot for the life of me get the c clip ring thing on the cover to go in! This shits about to puss me the fuck of, anyone have any tips?

ok so i finally bought me a 2013 NNBS Sierra crewcab on 5/10/2013 as a daily. i still have the bagged 99 too but im thinking of going the lifted route on this. my plans: Tint Rear wheel liner remote start leveling kit denali grill denali taillights change some chrome to white paint...

Couldn't find a good write up on this so I thought I would make one Tools you will need: Flat head screw driver Needle nose pliers Tube of clear rtv silicone Clean towel And clean work surface Start by removing parking lights from your truck and taking to a clean work area. Next take your...

Finally got around to candying my tails and was asked by a few to make a thread so here it is. dont mind some of my blurry pics. this can be done a few different ways but this is how i do it. 1. I scotched bright the WHOLE tailllight with a red scotch bright and some sanding soap. you could...

Finally got my drop finished up. Flip kit and spindles was supposed to be here Friday but got delayed till today. So I had everything done by Saturday and left it ready for the missing parts. Roughly a 4/6 drop. Specs: Front: Mcgaughys 16" spindles Belltech 8000 shocks Stock coils...

http://www.youtube.com/watch?v=OmqUlXQCAz8&sns=em Gannon approves this message.

So since Metalikatt deleted all of his pics, here's a new and improved MH1 retrofit thread. Coupled with my video and Geoff's photos I think it's better than what we had before. Video How-To. If you have 15 minutes and are planning on retrofitting your lights, watch this video. I made sure to...

Please help did a somewhat hard coat on it waited a 30 mins came out in this happened!

My 03 on 16.5x12 Weld Scorpios and 33x12.50 Boggers

The GM 2003-2007 GMT800 Trucks and 03-06 SUV's were plagued by defective stepper motors in the instrument cluster. GM's only solution for this is to replace the entire cluster at a cost upwards of $300 or more. Plus the cost of having your truck's mileage programmed into the new cluster, which...

Snagged some leathers on here that came off a Tahoe so i put them in and i love them so far...that cloth is gay, and stained with sweat and water etc. Thought i'd take some pics just to make it easier for anyone else attempting this in the future. Start with your ugly old cloth bullshit... 4...

I told Swampfox I would do this for him - so here you go for your reference. Here are the tools you will need - 15mm Socket on Ratchet or 15mm Ratchet wrench and of course super secret Stage 2 Lithium grease with Molybdenum nano particles Step 1 Remove bolt holding the shafts together...

Alright guys, this is my how-to for installing a DJM rear swaybar. This is a very easy install. Took me about 1 hour tops. This install was on a 2004 Silverado 1500 crew cab. Truck has 2” drop shackles, nothing else. They do make them for lowered trucks, you just have to specify your drop when...

Alright guys, this is my how-to for installing a DJM rear swaybar. This is a very easy install. Took me about 1 hour tops. This install was on a 2004 Silverado 1500 crew cab. Truck has 2” drop shackles, nothing else. They do make them for lowered trucks, you just have to specify your drop...

What's up guys, new member here. I've been on gmfullsize.com for a few years now and recently heard of this site so I thought i'd join and try to learn some more. My name is Brad and here's some pics of my baby, she's an 03 silverado and here are some of her mods: 5.3L with blackbear tune...

LEDs are becoming all the rage now, and more and more people are wanting to convert their interior lighting and guage backlighting to LEDs. Here is some info on how to do this upgrade on any NBS fullsize truck from 2003-2007 or SUV from 2003-2006. Patience, a steady hand and soldering skills are...

LEDs are becoming all the rage now, and more and more people are wanting to convert their interior lighting and guage backlighting to LEDs. Here is some info on how to do this upgrade on any NBS fullsize truck from 2003-2007 or SUV from 2003-2006. Patience, a steady hand and soldering skills are...

Morimoto H1 HID Projector Retrofit Adapter Plates for Denali Lights I recently retrofitted my Denali headlights with Morimoto H1 HID Projectors. In the process of researching the retrofit, I saw people may be interested in the adapter plates I would need to complete it. So, I had extras...

Got my adapter plates as a test subject for Nick on GMFS (Ri22o) to fit Bi-xenon: Morimoto Mini H1 4.1 - HID Projectors from The Retrofit Source Inc . So These adapters allow you to swap denali halogen suck projectors for HID projectors. On to the results. Morimoto vs. Denali Morimoto...

:up: excellent, replaced the rubber bushings in my leafs and shackles, for energy suspension bushings, cause i had a gnarly squeak coming from the rubber bushings (yes they were torqued AFTER i had them on the ground and jumped in the bed a little) 70$ for all around 2-3 hours of work (wasn't...