1. Oktain

    K2XX Bed Side Stone Chip Protection

    If you're like me and you drive your truck during winter months, and they sand/salt the roads where you are, or you drive down dirt roads, you've probably noticed stone chips on the lower front corners of the bed side. I noticed a few weeks back that GM has started putting guards on those...
  2. fortplainman

    NNBS transfer case issues please help

    so long story short a little more than 2 years ago i had my transfer case go on me. every time i put any power in reverse it would seem to drop out of gear and have a nasty grinding noise. a snap ring broke on the shaft and essencially caused a shitload of shrapnel in it and i had it replaced...
  3. fortplainman

    nnbs front door speaker problems

    anyone ever have problems with the stock door speakers? my passenger one the past idk 6 months has worked one day and not the next. starting yesterday both the driver and passenger door speakers stopped working. my a-pillar tweeters still work as well as my rear door speakers. anyone think...
  4. SamCarroll

    Red Tacoma Detail

    Had this one come to me in pretty rough shape. Wanted a polish, interior cleaning. Strip Wash Clay AIO polish Sealant PERL tire dressing Under Carriage spray In N Out spray for plastics On to the pics! Before: After: It was a nice...
  5. Lemaire337

    New Member from lafayette Louisiana

    2002 RCSB 6.0 swap, 4l80e 3600triple disk billet convertor, built 3.73 rear end #hoonigan Sent from my iPhone using Tapatalk
  6. A

    AlwaysSomethin 2015 RAM R/T...DD not a build thread! (And not a DAMN DODGE)

    So as Im sure you all know by now, I sold the Graystone truck to Brian ( @DirtyBlackHoe ). I wanted to get into something new, with warranty, so I could actually work on the projects, and not constantly be modding and messing with the daily instead. Picked up the 2015 Granite Crystal Metallic...
  7. SamCarroll

    FFR Heims? Beware

    FFR, Ive tried to handle this via PMs/Emails/posts multiple times. Each time i was told "they must not be tight enough" or "installer error". This absolutely sent me into a white fiery rage. I've worked in customer service for over 10 years and i hate when someone doesn't back their own product...
  8. WildChevys

    Thinking about lifting rear and going with A/T tires

    I've been thinking a while about switching to an A/T tire and switching out my 4" blocks for the 4.5" blocks I have. The truck right now has 1.5" of lean but the rear just seems to sit too low and I think bringing it up .5" would be perfect. I've also been thinking of switching out my nitto...
  9. Oktain 2015 Calendars!

    Hey everyone! Some of you may have heard rumors of a staff project in the works and we're finally at a point where we're confident we can let you in on the secret . For about a month and a half we've been working on bringing you guys a 2015 Calendar, featuring the 12 ROTM winners...
  10. GR$$N$

    Project watermelon

    So picked this gem up yesterday from bakersfield. Plans are to bring it back to life and change the paint immediately. Fix some of the fuck ups and resale it probably
  11. 9X37Crewcab

    Drl sensor help

    On my 06 silverado i had the windows tinted and had a brow across the top and bottom of the front windshield. Now my headlights come on all the time and add you can imagine is annoying having to turn off headlights every time u get in. Is there any way to modify the sensor so that its more...
  12. WildChevys

    New tires for the tahoe

    It's creeping up on the time when I'm going to have to replace the tires on the Tahoe and I'm kicking around a few options. My first choice are the cooper zeon ltz's however they don't make the size I need (275/55/20) so here's the other tire ideas I've got thus far: Nitto Terra Grappler G2s...
  13. Rjsk04

    New from SC

    Hey I'm James from South Carolina, I'm 19 and currently driving a 2004 silverado 1500 z71 and I have a 1977 k20 in the making.
  14. H

    Hulknasty's nnbs vortec max

    Well decided it was time to pick up a another truck. Ended up getting a black 2007.5 6.0 vortec max crew silverado ltz. Mods so Far: 2011 ltz split grille air aid mit intake tube K&N drop in Filter Cleared headlights LED turn signals 2.5 tgc level Antenna relocated billet bowtie...
  15. Ginger

    NJ meet pictures

    Here is the tread for pictures for the meet. All of mine are unedited. Anyone with camera skills have any suggestions let me know. @clean04 fortplainman Bassmaster Jenn Khaos here are the ghetto rigs from the Ringoes show and here are some of the cars from the...
  16. AdamsPolishes

    The Mystery Box is BACK!!!

    The Mystery Box is back, for 24 hour only. $24.95 gets you at least $34.95 worth of product, with random boxes receiving MUCH more, some as high as $200! ADAM'S MYSTERY BOX
  17. M

    Start to Turbo 4.8 Sierra

    Well I decided I needed a little boost in my life, so I pulled the trigger on an on3performance 70mm kit for my Sierra. I did have an lq9 laying around for a while, but I decided that I wanted to do something different for me. Ive always done NA motors, but never had boosted v8. This on3 kit...
  18. R

    RickLzonai 2500hd build

    My 2500hd Build up so far. - Chevy Truck Forum | GMC Truck Forum - just to get you guys caught up to now, you know how everyone looks back at their yearbook pictures and are just like ahh what the hell, so please spare me the grief about all the nonsense with my truck in the...
  19. Timmy

    My New Truck

    My 2008 RCSB Build (HD Front) So, after getting rid of the 13 crew cab, I missed having a GMFS, so I stumbled across this one. 2008 Silverado RCSB LS 5.3, pw/pl The truck was an Alabama state Gov't truck. It had dark titanium interior with leather seats (no, not vinyl), but the rubber...
  20. AdamsPolishes

    PRE SALE - Get 15% off storewide on the ALL NEW!!

    It's been a long time coming as it's been FOREVER since we've updated our website, but it's now out in the wild and ready for action!! Before we send out the email to everyone letting them know, you the forum faithful, who helped us mold and polish (pun intended ) the website, get access to...