foam

  1. dszx13

    Starter kit.

    Looking for recommendations on what I should get to fix my horrible paint an to keep it nice. I do not have a machine but I would like to get one. Looking for the best bang for my buck. I basically have the basic cheap soap from the auto parts store and rags. Sent from my SM-G935V using Tapatalk
  2. SamCarroll

    2017 Yukon XL

    This one was a big bitch. Mainly new car prep with a coating because he just got this less than a month ago. Process: Foam cannon pre soak IronX bath Foam & wash Clay CarPro essence polish CarPro Eraser wipe down Gyeon Mohs ceramic coating (2 coats) on all paint & wheels CarPro PERL on...
  3. B

    What pads and polishes are you using?

    So I've pretty much been stuck with adams and SCG so I want to try something new. With so much on the market the info is just overwhelming. So like the title says what pads and polishes are you using? Tool is a flex 3401. I've read that the LC hybrid pads are the best combination with the flex.
  4. J

    Speaker Recomendations for '08 Silverado (non-Bose) Stock Head Unit

    I just added foam speaker baffles and swapped out the intermittent 6.5" front door speakers with cheap Kenwood KFCG1620 (coax/4ohm) 6.5's. GOD it sounds like S**t! The stock ones when working actually sounded better. I don't want to run an amp (yet) but I need something better in the meantime...
  5. J

    2008 Silverado Replacement Seat Cushion, Foam, Etc ?

    Can anyone direct me to the Driver side OEM bottom/back foam replacement part numbers, and or the best economical place to buy them? Feel like I'm sitting in a toilet when driving...hahaha. Thanks in advance from the noob :wave:
  6. Connor

    Compound and Polish

    I have a DA that I use to wax fiberglass boat topsides in the summer. I use a wool pad for that, and I think it came with two foam pads, I have no idea what they are or do. For compounding and polishing my SUV, what pads do I need, and what compounds and polishes would be good for a beginner...
  7. 2

    Surf City Garage Clayzilla

    So last week I placed an order with SCG and was asked if I could provide a review if I was provided a product. I gladly accepted and was able to use it this weekend on a 2016 Mustang I detailed. Wont go into details as to wat/how this thing is or works but its supposed to be a replacement for...
  8. Bagged_Sierra

    Bagged_Sierra's Interior build

    I figured I would start a build thread on for the interior for my ride and I will post all the pics and info on what I have in in plan for it. Since interior work is out of my skill set I have a guy on the North Side of Houston doing this for me. My dash was cracked in the famous spots where...
  9. WildChevys

    Metal polish

    This winter while the forces are off the truck I want to try some more aggressive metal polishes and was looking for some suggestions. Currently I use Adams #1 &#2 metal polish with a mothers magic ball then touched up with a microfiber pad. Sent from your sister's house
  10. 2

    How to declad GMC 20s

    Most of you know I scored a set of NNBS GMC 20s...didnt see anything on here on how to declad, so here we go. I started off with these wheels, doesnt matter if you have the same ones I do or the other clad version, theyre the same wheel underneath. "Other" rimps...again, wont matter as long...
  11. Slammed2000

    Decladded 5 spokes

    Ok I'm gunna start hunting for some wheels to declad, what am I gunna be getting myself into? I am dead set on these, any tips, tricks, or suggestions I am open to! And do I have the right wheels that I'm looking for to have the wheels I want? These? Make these right?
  12. J

    Show us your lowered trucks doing work!

    We would like to see some lowered trucks doing work.
  13. SamCarroll

    GMC Sierra Detail

    This truck came in for a quick polish/seal exterior only detail. Below are the pics in order. Its hard to photograph Silver Birch through the changes of the paint but i can say it made a large difference in the depth and overall appearance of the paint. Its also now protected for daily driver...
  14. BigBoi

    Bigboi's 2015 Colorado thread

    Instead of posting tid bits here and there, I'll make a thread. 2015 Colorado LT ext cab 2wd Day I brought it home After tint, valence removal, and 2" AutoSprings leveling kit And how she sits now after debadging In the middle of fixing some issues. Did get the hood flutter fixed. For...
  15. Oktain

    Question: BUG REMOVAL

    Bugs Need I say more? I hate bug & tar remover. I think I've used it twice. What's the best method for removing them, without harming the finish? Honestly if there's a way to do it without stripping the wax off of the hood that'd be awesome too. I have to be selective of weather/time of...
  16. THE Mook

    New ZL1 Dealer Save

    Morn, did a 2015 ZL-1 a couple weeks back. Spent 20 hours on the polish side. It looked about 85% better when it was finished. I have never seen a dealership essentially murder a factory paint job like that ever in my life. There are some deep scratches and other things (dealer installed)...
  17. R

    v36 & v38

    I plan on purchasing the v36 & v38 combo this weekend. I plan on using v36 with an orange pad but have seen people use anything from blue,white,black for v38. I have blue foam pads already. What would be best to use with the v38.
  18. lowlife08

    got me a 66 caddy

    this one is Def getting bagged Here's how it's hopefully guna look soon
  19. ScottyBoy

    Anybody ever used Folex carpet cleaner?

    I have been reading a lot on some detail forums about carpet and upholstery cleaning. A lot of people swear by Folex carpet cleaner and swear about how great it is. I had some bad stains on the carpet at work from some customers who spilled BOTH a soda and a chocolate milkshake on an area of...
  20. slicksierra

    Detailing hacks!

    Not sure if we have a thread like this but I know there are more than enough pictures and videos to kick this thing off! HOW TO WAX A CAR - YouTube