engine

So my brother and I picked up a friend's truck that's been off the road for a while. It is a regular cab F-350 6.0 Diesel, cab and chassis truck that originally had a hoof trimming chute on it and then a flatbed. This truck has a 9' frame, so when my buddy bought it he wanted to put a longbed...

Over the next few months I will be slowly returning my 2007 Sierra Classic's suspension (and a few other things) to stock form so I can sell it and use my current wheels and tires on the '14+ Silvy. Prepping for a possible dealer trade so I'd like to have it as stock appearing as possible, the...

03 Tahoe I'm getting a reduce engine power code. Changed out the throttle body for a new one had the throttle body codes deleted because it was rev up to high got it all fixed up drove it home no problem what so ever next day turn it on drove it about a mile and again reduce engine power came...

2011, bought it brand new with 13 miles as a leftover in April 2013. I drove it lightly until 80 or so miles, changed all fluids, then set it up on jack stands and ripped most all parts off to begin building it. Here is what all it has. 2011 2012 seal kit 280 miles 70 hours Last 840 brute to...

Went to pismo, had some fun. I got airborne a few times and destroyed my OEM skid plate but thats no big deal. Ill make a video here soon once i get it finished. On to the pics When you see it....

Morn, did a 2015 ZL-1 a couple weeks back. Spent 20 hours on the polish side. It looked about 85% better when it was finished. I have never seen a dealership essentially murder a factory paint job like that ever in my life. There are some deep scratches and other things (dealer installed)...

Hey everyone. I've been doing a lot of searching on Performance Trucks and also on GMFS in the cam sticky...but just wanted to get some of your guys' opinions. I'm very (and by very I mean within the next couple of days) close to pulling the trigger on a cam and stall. I've gone back and forth...

What's up guys. Haven't posted here in a few years, but some of y'all might remember my green truck: Lowered 4x4, cammed 6.0, longtubes, converter, built trans, blah blah blah. Ran low 13s at 100mph, but was rusty as fuck and giving me issues constantly. The plan was to limp it until summer...

I'm looking for some information on putting together an engine that has the roller cam and possibly Vortec heads with the TBI option to keep my truck easier to manage. Since the entire swap is coming from the 'yard I will have the complete upper intake and fuel system less the harness and PCM so...

So I got my hands on Billys truck for the second time today. Came in just like it did last time, contaminated n neglected. After a quick pass in the engine bay Then out came the IronX! It was bad...still had some nasty deposits after the purple shower, so I...

Looking for a RUST FREE 1999-2006 GMC or Chevy RCSB 4x4. -Prefer '00-'02, but any GMT800 will do. -V6 or V8. -Automatic. -Under 200,000 miles, preferably under 150,000. Looking to spend $5000 or less, but may be willing to spend more for the right truck. Willing and ready to...

So i'm stumped kinda. Been messing around trying to figure out where the fault is that's causing my left side running lights to work (any running light feature, the 194, the 3157, and the left side license plate light) Also, idk if it helps but the 194 and the 3157 blink at the same time on the...

When the car is cranked there is fuel leaking from the fuel line connected behind the engine block. How do I replace?

Ok let's see. November my thermostat went out. Replaced it and all has been good. January or so I started hearing water slushing around behind dash when turning or idling. Sounds like fuckin waves crashing on a beach. Popped hood few weeks ago and coolant tank was completely empty. Topped it...

Most of you guys have probably seen this build on some of the other forums. Just thought I would get one going over here for CGM fam. somewhat of a timeline: truck started out 2/4 drop with a stock 5.3 and vortec blower. i then took it took vicalma to have it . Drove the truck for roughly 2...

As most know, i hit a dear with my truck a few weeks back. while it was with the body shop for repairs, we also decided to add a few updates. it was late and raining when i got it back, but as soon as the weather cleared up, i got out the adams and detailed it up :D TOO MUCH SHINE...

Hi guys about two weeks ago i noticed when i start my engine on my 06 sierra my rpms would go up to maybe 1500 and they it will come back down to 500-600rpm and then it will go back up to 1000rpm and then come down again. i didnt worry about it bcus it wasnt happening too often but it...

i have been tossing around the idea of getting rid of my 05 ecsb for either an 11 or 12 ccsb. now really sure which one to go with. i have a budget of around $25k. which most of them are right around there locally with anywhere from 40-60k miles is there much difference in the 2 does the...

For a very long time now everybody keeps asking me why I don't make a build thread. So today - I'm bored - and here it is. For those who don't know I have an 02 HD front end obsession. My two trucks are always works in progress but one I'm getting quite happy with the result. So without further...

Post up some photos of your (or someone elses) custom diecast/model builds. Any scale, any style! Ill start with a couple of mine. Ive got lots to share if interested!