So here is my truck from the start
Here it is after the 6" RCx lift along with 20x12 Gear Alloy big blocks and Toyo Open Country M/T 33x12.5 tires (which need replacing)
I then installed a set of clear headlights along with upper and lower billet grilles and colormatched bowtie
I also dyed...
Im looking for people opinions on where they have put switches in their NBS trucks. My light bar shows up today and I have no clue where to put the switch for it. Just as an FYI, I cant do next to the gauges, 4x4, fog and cargo light switches are there, the airbag switch is a cubby in my truck...
Victory red
Paint matched bumpers
Paint matched SS mirrors - powered
Dark Tint
Light scratches as any 11 year old truck would have
No major dents/dings
Spray in Bed liner in excellent shape
HID's in highs/lows/fogs
Interior - 9/10
Red LED gauge cluster back-lighting...
So you want to add a trans temp gauge to your 00-02 truck but don't want to have to get your mileage programmed? Here's what you'll need:
00-02 cluster with trans temp gauge (make sure its from a 6.0 with the 6k rpm)
Soldering Iron/Solder
Desoldering Iron
Lots of patience
some soldering...
So I just got some cooper STT 33x12.50 r20s on my 08 nnbs with stock 20s and my cluster screen keeps flashing check rear and front tires. Is there anyway to reprogram my truck sue this annoying message stops flashing at me? I'm new to the Chevy world so I would really appreciate the help on...
Ok I'm putting a transmission temp gauge on my 2000 silverado, it's a 4l60e trans, is the test port right above the shift linkage?? And will I need a extender or can I just thread the temp sender in?
I have followed the site for quite some them but just decided to becomes member last week. Just wanna say love the site, very nice trucks and knowledgable guys on here. I have a 99 2wd Sierra, 92k 4.8L.
This is where I started at, few days after purchase.
If there is anything that's not listed that you want just let me know .
-motor-sold
-cluster sold
-Rear bumper sold
-Front seats sold
-hydro boost sold
-steering box sold
Console -keeping
Still available-
-Front door panels without handles 300.00 obo
-Rear door panels 150.00
-Upper dash and...
selling absolutely everything from a 2000 ecsb Z71. no 4wd axle shafts.
everything is up for sale except the center console and dash pieces as well as the engine.
parts of interest
2" lift blocks $30 shipped
Steel cowl hood $150 picked up
Hd Grille and Bumper $350 picked up
everything else is...
Okay most of you know i sold the old 5.3l
and bought my self a decently clean looking 2006 LBZ LT3
here is some pictures
will add more pictures when its clean i hate seeing it this way
interior plans-
-double din
-10" sub
-amp
-weather-tech floor mats
performance plans(will take a...
Like the title says, I have a 6.0 lq9 and 4l65e out of a 2002 escalade for sale . The motor has 13x,xxx on it and runs perfect ( still in the vehicle) . It will come complete with all accessories and harness . I will be pulling it out within the next few weeks and can send a video of the truck...
OK so yesterday i was driving and every time i stopped at a red light my fuel gauge would drop down to empty and the light would come on.... when i took off and started driving again it went back up to a 1/4 tank... but it also threw my check engine light on.
When i started it up this morning...
Well i want to put some lights under the hood, but i need some ideas on the direction i wanna go with so guys wh:embarassed:ore out your under hood lights. thanks for any ideas.
I need talks help pretty bad. Do I started my led. Cluster. Swap an everything went fine at first. I took every precaution I could an still came up Donald big problem. I of course marked my needles but after I assembled the cluster an installed it my gauges are off. Fuel isn't marking right my...
Picked up a heavy load at home depot, staff was pants on head retarded and loaded a pallet that didn't have support on one side. Load shifted on the drive home. When I unloaded the truck and turned it back on, both my stabilitrak and traction control lights went on.I don't have a scan tool bit...
This is the stock cluster bulb, Do I have to solder in a replacement or can a bulb be pushed in this socket after removing the burnt out one. Also what number bulb does it take if it takes a push in one ? I just did my stepper motors and now I have one bulb that just burnt out. I like the...
Should the check engine light come on with just the ignition turned on ? Mine does not but all the other warnings do. I know it works as I have had it come on before I cleaned the MAF sensor. Thanks Doc
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.