1. wretched73

    WTB 6.0 and 4x4 4L80E

    My 5.3 is on its way out so I'm looking to start gathering parts for a 6.0/4L80E swap. I'm in Jackson which is Central NJ. I'm more interested in getting the 6.0 first. Let me know what is available, I'd be willing to drive 2-3 hours to meet up if necessary.
  2. J

    For Sale: Silverado tahoe escalade suburban sierra 4.8 5.3 6.0 magnacharger supercharger

    For sale is a GM fullsize truck Magnacharger Supercharger.It is in excellent condition and does not require service.It will come with 8.1 big block fuel injectors and dyno tuned 0411 blue plug computer for a 5.3. Asking for $2800 shipped. Thanks
  3. J

    For Sale: FS: New TVS1900 Supercharger kit for GM truck/SUV

    Up for sale is a brand new Roush Intercooled Stage 3 TVS 1900 complete supercharger kit. It features the all new and extremely efficient Eaton TVS 1900 supercharger. It will fit 2007+ 5.3 and 4.8 Chevrolet Tahoe, Suburban, Silverado, Avalanche, and 5.3 and 4.8 GMC Yukon and Sierra, but can...
  4. E

    Emery FINALLY buys a GM

    That's right, after countless years on GM forums with Fords I finally bought a GM. Don't worry though, my Powerstroke is still around. Anyways, as some of you know, since the fall of 2013 I had been daily driving a 2005 Subaru. Well this past July with less then 100 miles short of 200k, the...
  5. low2thaearth

    For Sale: 07-08 Gas Edge evolution programmer

    I have a Edge evolution programmer for 07-08 gas 4.8, 5.3, 6.0, 6.2l trucks. Have the dash pod for The Basic style trucks(non Denali/ltz). Bought it from a member on here a couple years back for additional monitoring on my old Sierra. Won't work on my 2012 Silverado so that's why Im selling...
  6. H

    D1sc procharger kit

    <br /><br />D1sc procharger, air to air intercooler, truck bracket, belt, red race valve, intercooler plumbing, siemens 80 lb injectors, wideband o2, boost gauge, nnbs pillar gauge pod. Air aid air filter. Headunit is polished finish. Low miles. Pulley makes 10psi. Fits 5.3, 6.0 truck motors...
  7. Blackout

    Procharging an lm7, need advice

    In the end, I've decided to keep my truck and start gathering parts to procharge next year. My intentions are to have a reliable daily driver running on pump gas that can really get down when I want it to at the strip one weekend and go to the sand dunes the next. I want to stay as economical...
  8. Malikk Loftis

    Malikk's 92 s10

    Had this truck since my sophomore year. Always wanted to ls swap it now I'm getting around to it. Was originally going to be a lq9 that I was getting in return for doing a cam swap, and help with an ls swap. Motor ended up having water in it. So I got it and $1200. Have a set of cnc'd 317's...
  9. B

    6.0 build cam options.

    2012 gmc Sierra crew cab 4x4 Stuff I have now / all most ready for swap Ly6 6.0 block Lq9 flat top pistons Cnc ls3 ported heads Ls3 intake manifold 1 7/8 headers with 3" exhaust I'm still haven't decided on a cam/converter this is my daily driver/street truck I'm shooting for around...
  10. Blackout

    Truck needs rings.. Or should I 6.0?

    My 03 5.3 uses about a quart of oil per thousand miles. And trans is weak. Would it be more economical to 6.0/4l80e swap it or rebuild the 5.3? Edit: Keep in mind I'm planning on tradong it for a 6.4 superduty or an lmm next year Sent from my leather heated ass
  11. Slammed2000

    The slow build of my 2000 Silverado rcsb

    Got one of the bigger things finished that I wanted to do the truck done today, got my hd clip all buttoned up and just need the lower valance, still have a lot to do, need to lower it more (5/7), build the motor (torn between a 6.0 and rebuilding the 5.3 money depending) doin all the paint and...
  12. J

    2006 Silverado VMax

    I really do not want to sell this truck, but I have no room at my house nor time for this truck. I bought this truck from Zero (Will Andes) back in 2011 and only added longtubes to it. Currently the longtubes (with no cats) are installed, but I'm planning on swapping back to stock exhaust...
  13. BOO5TED

    For Sale: Morimoto Mini 6.0 projectors, Denali adapters, 5K H1 bulbs

    Like the title states I have 6.0 projectors, Denali adapters and 5K H1 bulbs for sale. Located in ATL, $110 shipped.
  14. A

    FNG from indiana

    Just found this place. Have an 07 burb with the crappy afm 5.3. Was wondering about a 6.0 swap. Gas mileage wouldn't be much worse. Has a160k miles on it and is using a quart of oil in about 2k miles. Also have a couple duramax's as well.
  15. H

    Garage clean out

    Central WI Well Im finally breaking down and trying to clean the garage out... tons of parts to sell. D1sc procharger, air to air intercooler, truck bracket, belt, red race valve, intercooler plumbing, siemens 80 lb injectors, wideband o2, boost gauge, nnbs pillar gauge pod. Air aid air...
  16. slicksierra

    Brand new vleds HI VIS Amber 194 bulbs

    Hi guys, selling these brand new bulbs, no issues with them at all just didn't like the way they looked in the corner light next to my new switchbacks. Retail is 18.00 for the pair plus 6.00 for the shipping. 20 bucks and I'll ship them fo free. Here's a link: HIGH-VIS AMBER 4 LED BULBS 194...
  17. 2

    Morimoto Retrofit Adapter Plates

    This is a continuation of the previous adapter plate sale thread. http://customgm.com/sale-trade-classifieds-car-truck-related-only/5011-morimoto-retrofit-adaptor-plates.html As of 11/5/15, I have more sets coming in either late november or early december. I can put ur name down on a list and...
  18. W

    Important!: 6.0 Cam swap???? Need help

    I have a 2002 6.0 and I want to put a mild cam in it but don't know how to tell what sizes are or mean I'm 18 and this is new Ive done stock rebuilds but customizeing is new to me. The 6.0 is going to be for my lsx swap on my 1984 Elcamino any help is greatly appreciated thanks! Who can spec me...
  19. Ginger

    How to Retrofit your Denali Headlights.

    Here is my How to on retrofitting the factory Denalis. My write up is a little different as i was re-retrofitting, so removing the projector from the housing is similar but a little different. the parts you will need are (2) Aftermarket Morimoto 6.0 Projectors (8) 8-32 bolts that...
  20. marc

    BR power source

    so anyway BR power source has started a company BR Powersource Your Diesel Performance Tuning Centre the guys name is Berny he is super cool and has a lot of experience tuning trucks for landscape and heavy equipment companies just figured it would be a nice option for us Canadians...