Search results

  1. slonlow2000


    I bought an old high mileage 03 that the cluster goes out at times, all the stepper motors go out at the same time. From what I've been reading the small packs of resistors in the cluster overheat and yellow's the board. I took mine apart and found that, but no idea how to fix it. Have you guys...
  2. slonlow2000

    Project: Keep it stock

    I work at a Chrysler dealer at the service desk. A couple weeks ago we got a high mileage, rusty, 03 ecsb traded in and I bought it before the wholesaler seen it. Its got 215000 miles but still running strong. I needed a truck to use as a truck since my sierra is too nice to get into some...
  3. slonlow2000

    WTB: kp 6 link for 99-07 gm truck

    Looking for a used KP 6 link for the 99-07 gm trucks. Need to replace my 2 link that causing some rubbing issues for me. 37 by Gabe Reed, on Flickr
  4. slonlow2000

    OBS tailgate handle flip kit

    I have 1 belltech OBS handle flip kit for shaving the tailgate. $30 + shipping, it is surface rusted but all the old original instructions are included. IMG_3201 by Gabe Reed, on Flickr IMG_3204 by Gabe Reed, on Flickr
  5. slonlow2000

    Need some help, I need some old Boyd's re-hooped any ideas? 22x10's

    Did some trading for these a few weeks ago, after getting the curb rash out and tires mounted there is still some waves in the lips from prior repairs, and I'd like to change the width and offset on them anyways. They are an old 3 piece so Hot Rods by Boyd cannot help unless I want to buy 50 new...
  6. slonlow2000

    Bagged 1999 GMC Sierra

    Interested in trading for a RCSB or a crewcab, or a stock truck and some cash. Prefer 2wd non-black trucks. Sell price is $13000, but mainly trying to trade at this point in time. 1999 GMC Sierra, 5.3 with 157000 miles, and a 4L60E with around 3000 miles on a fresh rebuild. VIN...
  7. slonlow2000

    Front suspension rebuild help?

    I need to rebuild my front suspension and get it aligned to prevent this in the future for at least a little longer. Untitled by Gabe Reed, on Flickr I have a basic bag setup on factory control arms, the upper were apparently flipped but I'm not 100% on that on a 265/35/22 and I don't...
  8. slonlow2000

    Flashing battery light after multiple mods at once, help!?

    Truck in question is a 99 2wd Sierra. I had my trans let loose so I had to pull it to rebuild. At that time I figured I would do a few mods at the same time to save on down time. Here's a list of what all was done. Rebuilt trans (original was rebuilt) Pcm tune by blackbear (original was...
  9. slonlow2000

    4l60e Install help?

    Heres my situation, lost 2/4/reverse in my trans several weeks ago. Fianlly got the stupid thing out after following a how to over on Now is there a how to for installing? I had to buy new torque converter to flywheel bolts due to mine having a allen head center only. Do those bolts have...
  10. slonlow2000

    OEM GM Stepside tail lights 99-07 Silverado/Sierra

    I bought a package deal on some head lights for my sierra awhile back. They came with tail lights and turn signals. The signals were junk, and I have a fleet side bed so these wont help me too much. They have all mounted tabs for the bulbs, and all mounting clips for the screws. They clean up...
  11. slonlow2000

    Is it possible to run a sway bar with basic front bag system?

    I picked up this truck at the end of last year. Been poking around fixing what I can, and keep coming back to the sway bar. Its running drop spindles and cups in the front. The bolts for the original sway bar hold down are still in the frame rails. I'd like to get a sway bar back in...
  12. slonlow2000

    OEM Rear leaf spring shackles 99-06 2wd

    These were pulled form my 00 Silverado when I installed drop shackles, truck had around 80xxx miles when they were removed. Been sitting around the shop so I'm just cleaning up. $25.00 shipped
  13. slonlow2000

    2004 Silverado Z71 OEM flairs, liftblocks, and mud flaps

    My dad decided to clean his garage and dropped off all these parts at my place. I don't need them anymore so they are now for sale. OEM ~1" lift blocks and u-bolts $40.00 + shipping OBO Silverado Z71 mud flaps, these are form fitted to the Z71 flairs in the front. $50.00 +...
  14. slonlow2000

    Need help: Are 1/2 ton van wheels the same 6 lug as trucks?

    I've been looking for a nice set of factory 20's an these are for sale locally but they say they are from a 1/2 ton van. Are these the same offset and lug pattern as the fullsize GM truck 6 lug pattern?
  15. slonlow2000

    Bag recommendations?

    I've been out of bagged vehicles for a couple year. Been doing the static thing for awhile. Last time I was buying bags it was re7's. I've been reading around and it looks like they slam makes different bags now. Also seen a lot of people running dominators. So what are you guys running and...
  16. slonlow2000

    (1 Set) Morimoto Retrofit Adapter plates

  17. slonlow2000

    Good quality clear NBS Sierra Headlights, Where to buy?

    What lights do you guys recommend, or have experience with? I know ebay has them but I want something decent in quality. Close to OEM mounting and clips. I'm doing a projector retrofit and need the clear lens. The Denali lights that were on my truck were aftermarket and did not come apart as...
  18. slonlow2000

    Wanted: 99-02 hvac controls

    Looking for a working set of 99-02 hvac controls. Mine were all cut up for a poorly done double din conversion. Looking for some with all 4 mounting pins still intact.
  19. slonlow2000

    BCM Swap 99 to 2000

    I've got a 99 sierra, and any of the 99's will not unlock the doors when you put the vehicle in park. It cannot be programed and cannot be changed. So starting in 2000 this is an option. I picked up a 2000 BCM this weekend. Is it just a plug and play swap, or is there more to it? I don't want to...
  20. slonlow2000

    Wanted: NBS Door speakers, blown is perfect.

    Looking for 2 NBS front door speakers. Just looking for the mounting bracket mainly so if they are blown that's even better. My door speakers were mounted to the door panels in this new truck I got and were rattling around. I moved them back to the doors temporally, trying to find a factory...