Search results

  1. Tukn4s

    NBS tahoe bagged, bodied, billets

    I understand man. Like I said everyone has their cup of tea. Nothing is wrong with it but you can't get the camber to stay 0⁰ with the same lift as straight axle, so it won't be something I chose to do for one of my builds. Sent from my SM-G965U using Tapatalk
  2. Tukn4s

    NBS tahoe bagged, bodied, billets

    It's just the look. I'm not a fan of any unnecessary camber. Some people are fine with it and thats cool but I just don't like it. On small chassis suv's I think it's the way to go, but i also wouldn't run any wheels wider than 24x9. You can create sufficient lift with proper camber curve, but...
  3. Tukn4s

    BB's full frame build

    10" of clearance is better than some trucks that are just bagged Sent from my SM-G965U using Tapatalk
  4. Tukn4s

    BB's full frame build

    3 link suspension beginning Sent from my SM-G965U using Tapatalk
  5. Tukn4s

    NBS tahoe bagged, bodied, billets

    Fuel cell in place. Right at 20 gallons Sent from my SM-G965U using Tapatalk
  6. Tukn4s

    NBS tahoe bagged, bodied, billets

    Body is on the frame. Exhaust is in. The firewall is painted and cleared the new color.
  7. Tukn4s

    NBS tahoe bagged, bodied, billets

    Long time coming. Laid down the raptor liner today Sent from my SM-G965U using Tapatalk
  8. Tukn4s

    NBS tahoe bagged, bodied, billets

    All the fab work is officially done on the tahoe chassis. Swapped the shorty headers for full longtubes. Turns out even with the lowered engine, the 99-06 speed engineering longtubes will work and do not hang below the bottom of the frame. The exhaust will be cut a little shorter to add turn...
  9. Tukn4s

    NBS tahoe bagged, bodied, billets

    Yeah, the tahoe/suburban and even the avalanches all are really cramped with how the gas tank/4 link/ and frame rails are. It's a challenge when doing these. Surprisingly the doors and rear weren't as bad as I anticipated. I can make you a set of you need them Sent from my SM-G965U using Tapatalk
  10. Tukn4s

    NBS tahoe bagged, bodied, billets

    Spent some time finishing up all the crossmember fitting and doing the last test fit before it's time for frame prep and powder Sent from my SM-G965U using Tapatalk
  11. Tukn4s

    NBS tahoe bagged, bodied, billets

    I would consider it if a vehicle wasnt going to have such wide wheels. Sent from my SM-G965U using Tapatalk
  12. Tukn4s

    NBS tahoe bagged, bodied, billets

    I feel like I'm making good time when doing this stuff until i look at the clock and see how long it took to fit 1 piece Sent from my SM-G965U using Tapatalk
  13. Tukn4s

    NBS tahoe bagged, bodied, billets

    This be my least favorite thing to do on these builds but it still must be done Sent from my SM-G965U using Tapatalk
  14. Tukn4s

    NBS tahoe bagged, bodied, billets

    Yesterday had a lot of grinding and clean up involved. Had to modify the passenger side upper arm mount closest to the radiator to clear for an a/c line with the lowered engine. Will hopefully have the plates for all the rear notch joints by this weekend so i can add the cross bars for the shock...
  15. Tukn4s

    BB's full frame build

    im just using it as a 3/16" spacer because the arms i'm using are my old arms and the bushings aren't the correct width for the arms that will be on the truck. my frames use cam bolts on the lower arms to adjust alignment.
  16. Tukn4s

    BB's full frame build

    For me, if someone is wanting a body drop, I can build a chassis that gets everything in a much better position faster and easier than by building a chassis. The time it takes to do everything that's necessary to body drop over a factory frame takes a lot of time and ultimately to do it well...
  17. Tukn4s

    BB's full frame build

    Motor mounts and trans mount are in place for. Used my mock up arms which have bushing that are slightly narrower that the actual arms so had to add the spacer. The a/c line will be the closest contact point. This truck will be running full long tubes and a truck oil pan. The actual block is in...
  18. Tukn4s

    BB's full frame build

    Tore the heads off 5.3 I picked up for the truck. With a good cleaning it should be a good engine. Also started mocking up the front suspension Sent from my SM-G965U using Tapatalk
  19. Tukn4s

    BB's full frame build

    More pics
  20. Tukn4s

    BB's full frame build

    So I bodied james truck back last year utilizing the factory frame because it was already bagged. The rear suspension was very nicely done but the pinion angle wasn't right and the lift was extremely limited from poor bag placement. The front was also an ekstensive kit. So I made a decision to...