Search results

  1. Oktain

    Special package 07 gmc sierra

    Ok, so here's what's up with your situation. In 2007, GM released the GMT-900 platform. That's the truck that ran from 07-13. Your truck, the 07 Classic (which is a better truck imo) is chassis code GMT-800, and is ACTUALLY just an 06, but they ran production of the GMT-800 into 07 as most...
  2. Oktain

    Your vehicles as they sit now!

    Took the beater truck hunting. For those that didn't know that I have this old turd, it's an 02 Denali XL, 6.0 4L65e, AWD. I installed a Bro Bar, CB, and retrofitted the headlights with old parts I had from my 2006 Sierra. It's got speed holes in the passenger fender and the rockers have vacated...
  3. Oktain

    Special package 07 gmc sierra

    Which body style do you have? The 07-13, or 07 Classic, which was the last hurrah for the 99-06 body style? Also, if you could post photos and any other details about your truck that would be helpful as well. I'm genuinely curious about this.
  4. Oktain

    Huck’s 1985 C10

    Clean up the camshaft, and use it as a prop rod at car shows lol
  5. Oktain

    Huck’s 1985 C10

    That 305 looks like an environmentalist's worst nightmare. I was going to say list it on Marketplace as a boat anchor, but you probably couldn't even give it away for that. Another idea though:
  6. Oktain

    New K5 Blazer Owner in Alaska

    Do they not salt the damn roads up that way? I know my dad bought a K5 back in the 80's from the Yukon and it was MINT, they only sanded roads. Definitely want one of these eventually.
  7. Oktain

    Huck’s 2005 Silverado

    :bananadance: lol
  8. Oktain

    Huck’s 2005 Silverado

    Now that everyone mentions the trans crossmemeber, mine is even close on my 2015 when it's cold and I turn to pull out of my driveway in the morning with the truck, it just lightly contacts the cross member as well. Once everything heats up though I never hear it again.
  9. Oktain

    Huck’s 2005 Silverado

    I know Speed Engineering fit MY truck perfectly, maybe they have the NBS dialled in too?
  10. Oktain

    Huck’s 2005 Silverado

    Do you guys have emissions testing in Jawja? If not, rip out the cats, do long tubes, and a good tune with everything else you're planning and you'll see one hell of an increase. Headers and my tune on my current truck was worth EVERY penny.
  11. Oktain

    Huck’s 2005 Silverado

    This is the thing, motor out of the CC obviously needs work, so it sounds like a good excuse to really give it a good freshening up and even throw some upgrades at it, such as heads and what not, and should be a good power plant for the C10 after you're done. It's too bad that after how clean...
  12. Oktain

    Huck’s 2005 Silverado

    :bananadance:
  13. Oktain

    Huck’s 2005 Silverado

    I'm not sure it's so much the truck being tall, as you not being tall lol. Seriously jealous of this find though. Once the Denali dies I'll need a "nice" southern truck to bring up to sacrifice to the gods of salty winters. I love NBS trucks, but with religious undercoating and just staying on...
  14. Oktain

    Canadian RCSB build.

    They're Morimoto FXR 2.0's with 35W HID's. 5500K temperature. Kind of wish they were 4300K, but they match everything else perfectly, LED wise. So the truck is an SLE, I bought used SLT headlights, a SLE to SLT conversion harness from Gen5DIY.com, Diode Dynamics Switchback LED boards, so...
  15. Oktain

    Canadian RCSB build.

    Went out and took some pictures. Also had the tail lights wrapped with a vinyl tint to smoke them out a little. I haven't taken any pictures of that though. Late Evening by Pat Brunet, on Flickr Late Evening by Pat Brunet, on Flickr Late Evening by Pat Brunet, on Flickr Late Evening by Pat...
  16. Oktain

    Your vehicles as they sit now!

    Late Evening by Pat Brunet, on Flickr Late Evening by Pat Brunet, on Flickr Late Evening by Pat Brunet, on Flickr
  17. Oktain

    Huck’s 1985 C10

    I was going to tell you to get a tonneau Huck, definite necessity with an RCSB. I have a 2x6 cut to fit into the slots in the rear of my bed. Gives me a nice space for small items so I don't have to go crawling in the bed for them when I get where I'm going. I had to dig this up from 5 years...
  18. Oktain

    Lpp headers need catted ypipe

    They would sell, but be willing to ship them IMO
  19. Oktain

    Huck’s 1985 C10

    This is so damn exciting. I was super impressed with my headers too. They didn't feel flimsy at all when we were installing them. Pretty happy with that purchase.
  20. Oktain

    Canadian RCSB build.

    I think I'm going to take it to an exhaust shop and have him weld some shit up for me. It sounds like my leak is back where the Magnaflow meets the LT's. There's a reducer, to a facoty style flange, to Magnaflow's factory style flange/flexpipe, which is clamped to the rest of the magnaflow. In...