Recent content by jonmx477

  1. jonmx477

    Boost District Build on the 04 Prerunner

    No picture update. Ended up having to contact Fuel Injector Connection and getting injector data, and I can not stress the importance of that. The last data log showed a huge improvement in long term fuel trims. Close to 0 or below now so no P171 and 174 anymore. However, it did throw a P106...
  2. jonmx477

    Boost District Build on the 04 Prerunner

    Sent in my data log to blackbear and found that my Long Term Fuel Trims are high and causing a p171 and p174. If it is a vacuum leak it is hard as hell to find. At idle gauge says 20 inches of vacuum and it has no problem holding boost. And wide band isn’t telling me anything out of the normal...
  3. jonmx477

    Your vehicles as they sit now!

    LSA swap up and running. Untitled by Jon Mounter, on Flickr Untitled by Jon Mounter, on Flickr
  4. jonmx477

    Boost District Build on the 04 Prerunner

    Took it out for the first drive and was very happy with Blackbear's first tune. Sent a data log to Justin and waiting to see what he thinks. Builds 8 psi no problem. If anyone needs the QD connectors for the lid they are Dorman 800-919. Just be aware they are 5/8" barbs you if you are using...
  5. jonmx477

    Boost District Build on the 04 Prerunner

    Justin at Blackbear said a 255 would be fine for my current set up. And walbro says they can support roughly 500hp. This is a very similar set up to if I would have got a tvs1900. I believe the 1900 kit for my truck includes a 255lph pump.
  6. jonmx477

    Boost District Build on the 04 Prerunner

    Still chipping away. Getting down to the final details. Glowshift gauges are in. Them seem decent quality. Although the pillar pod was only like $35 and it shows, but I'm not too worried about it. I got the heat exchanger mounted and am pretty happy with how that came out. I used some...
  7. jonmx477

    Boost District Build on the 04 Prerunner

    Got an AirRaid u build it kit and got the intake together. Gotta hook up some vaccuum lines and finish the wiring for the gauges and will try and turn it over. Untitled by Jon Mounter, on Flickr
  8. jonmx477

    Boost District Build on the 04 Prerunner

    I used a ICT Billet throttle body adapter and it looks like I'll need to run my tb upside down. The motor on the side is too close to the blower pulley and the belt will hit. Untitled by Jon Mounter, on Flickr
  9. jonmx477

    Boost District Build on the 04 Prerunner

    Lid is on and working on wiring. I had to use adapters to use the newer ev6 style injectors since my truck has the mini delphi plug. I tested the walbro 450 with the stock returnless system in the bucket. I drilled out the venturi jet to .200" and wanted to make sure everything would still...
  10. jonmx477

    Boost District Build on the 04 Prerunner

    No, the belt goes from the top idler on the right, blower, water pump, tensioner pulley if you traveled counter clockwise
  11. jonmx477

    Boost District Build on the 04 Prerunner

    Blower is on. Gen3 water pump just barley clears the bypass valve with the 1/2" adapter plates. Rosh got me the needed mini delphi to ev6 injector adapters and the fuel pump install kit. Next is get the lid on and clean up the wiring. Untitled by Jon Mounter, on Flickr Untitled by Jon...
  12. jonmx477

    Boost District Build on the 04 Prerunner

    Just two crappy pics from this weekend. Got the OKW bracket on. The PS pump lines are a pretty tight fit, and I need to clean up the wires stuffed under the line. And the instructions for the bracket say to reuse you stock idler pulley, but when I mounted it up and put the additional idler...
  13. jonmx477

    Boost District Build on the 04 Prerunner

    Biggest reason was price. But I also like the novelty of it being a factory gm option and I think the zl1 lid looks good.
  14. jonmx477

    Northwest 4x4 "Prerunner" Build

    Snow is coming down now, but truck will be parked because parts are here https://customgm.com/index.php?threads/boost-district-build-on-the-04-prerunner.11904/
  15. jonmx477

    Boost District Build on the 04 Prerunner

    Got my truck kit from Boost District. Rosh at Boost District is a very knowledgeable guy. And super helpful. I've been pretty happy with the customer service. I haven't got too far into the install and progress will be slow. But the kit covers all the basic and big items and then there are a...