opinions

[Fred 4/6]

I just want you guys opinions on these 2 products before I hit the buy buton please

Performance Parts - 1999-2006 GM Truck & SUV - Engine - Pulleys - Tick Performance, Inc.

Texas Speed & Performance 1-3/4" Stainless Steel 1999-2007 Truck Headers

 

[CammedVmax]

I wouldn't buy the pulley, power gain is minimal especially for how much the shit cost lol.


Sent from Tapashit

 

[Fiesty]

I've got the ASP pulley. I can't tell u how much it added, did lots of things at once. But you will need and alternator overdrive pulley too, and a smaller belt. ASP sells both pullies together.

 

[Fred 4/6]

ive never heard of the alternator pull only this one.
are the headers good?

 

[Country_09]

Have the Texas speeds on my big truck. Great fit, no problems with em

 

[CammedVmax]

Headers are good


Sent from Tapashit

 

[Samuel6731]

headers are good. Few local friends run them with no issues.

IMO there is plenty of other things id do before buying that pully. Also as said other pullys are needed with it if you want it all to act right.

 

[Jared]

pulley usually adds around 3-5 typically, and some say upwards of 10-12, you'll only notice it on a dyno with numbers. Also, look at scoggin dickey, I bought my pulley for my car there and they were $100 cheaper than other places.

Cal speed and Speed engineering have cheap headers too, and stainless steel

CalSpeed & Performance Stainless Steel 1-3/4" Long Tube Headers with 3" Stainless Y-pipe for 99-08 Silverado
Speed Engineering 25-1012 - Speed Engineering Truck & SUV Longtube Headers (1999-2013) | Speed Engineering

 

[Jared]

also, Powerbond makes the SLP pulley :wink: so you can probably get it cheaper through PB

SLP 100230 - SLP Harmonic Balancer Underdrive Pully (Trailblazer-SS/ Silverad | Speed Engineering

see what I mean?
https://sdparts.com/details/powerbond-harmonic-balancers/kpbu1190ss25-trk

or, buy the pulley, and go to the parts store and get new belts, and then a bolt from the dealer or parts store for $5-10...I opted for the ARP bolt personally

 

[Fred 4/6]

Thanks for the input guys. I got the Texas speed headers and I think I'm going to hold out on the pully for a little while.

 

[CammedVmax]

Thanks for the input guys. I got the Texas speed headers and I think I'm going to hold out on the pully for a little while.

Good choice imo. Pulley money can be put towards gears or cam swap or something you'll actually notice.


Sent from Tapashit