Morimoto Retrofit Adaptor Plates

[Ginger]

So i made my own retrofit plates, and while i had the machine set up i made a few extra sets.

These are the adaptor plates to retrofit the Morimoto Projectors from The Retrofit Source into the factor Denali Housings.

These are made out of 16ga 304 Stainless Steel.



If your interested, PM me, and we can go through the details.

I am shipping from New Jersey.

**UPDATE ON POST #40**

 

[AlwaysSomethin]

I'll take 2 w hardware. PM me your info.

 

[Oktain]

You should see if you can make a set for the Mini 6.0's.

 

[Ginger]

I told i believe matt aka slicksierra if someone provided the projector. and doesnt mind about a month lead time, for me to put them into production, i can make them.

If i can get a pre order of over 20 people, i can cut the price too.

Im just hoping to get rid of most of these first.


Sending a PM in about 2 min Austin.

Just for reference for anyone else. its easier for me to keep track if you can PM me.

 

[BOO5TED]

How about you buy another set of clear denalis and the 6.0s, do the retro and I'll buy those from you?

 

[Ginger]

sounds like a lot of overhead there tony....

if i wanted overhead i would buy the 6.0s the housings havent changed.

i havent even seen the 6.0's they that good?

 

[BOO5TED]

 

[slicksierra]

6.0's have been overhauled optically, there beam has been adjusted correctly so that they now longer need foreground limiters which is good for us

 

[Oktain]

sounds like a lot of overhead there tony....

if i wanted overhead i would buy the 6.0s the housings havent changed.

i havent even seen the 6.0's they that good?

The projector bowl has been redesigned and has eliminated the need for the foreground limiter to sharpen up the cutoff. The cuttof on the 4.1 Mini's were not as sharp as other, so they put foreground limiter in and called it a 5.0 which had super sharp cutoff.

6.0's have all issues fixed.

This is what the new cutout for the projector needs to look like.

 

[BOO5TED]

This is what the new cutout for the projector needs to look like.

Make it happen captain.

 

[Ginger]

easy,

like i said if i get one i will make it.

whoever provides one for the design, will get free adaptor plates

 

[Oktain]

 

[Ginger]

2 sets sold to Austin.

7 Sets left.

 

[Ginger]

Bump to anyone else that is interested.

I tested them on my own truck to make sure they work. Austin recieved his yesterday.

 

[AlwaysSomethin]

I did get mine yesterday, fuckin sneaky ups guy hides my boxes on the porch to fuck with my head haha. Now I need projectors, and to actually use em

 

[Ginger]

Bump.

 

[James720]

So with a little hands on, you think using these brackets I could fit these in 95-98 lights? I want projectors, but I don't want some shitty ass, ebay ugly as donky dick headlights.

 

[Ginger]

these adaptors are made for the NBS denali lights to adapt a better projector into the factory housing. you would have a lot of time and money into makine the OBS lights have a projector and still need to hope that it would fit into the truck when you put it back together.

 

[Oktain]

A retrofit in your truck would not be bolt-on like the Denali's... Your would require some pretty major housing modifications.

 

[James720]

I realize it's not gonna be bolt on. Just wondering if these would make it any easier to mount them. From what I understand, these mount to the Denali housing, and provide the proper mounting points for a better projector. So in theory, I could cut the hole, mount this to the light housing, them mount the projector. I understand there is a lot to it, just thinking these may make the modifications somewhat easier.