HP tuners tranny help.

[Samuel6731]

So basically I have a built 4l60E.
When it goes to shift it wants to wind out and kinda slip on forward.
I want a hard shift from one to the next with no play in between like its currently doing.
Iv been messing with it and just cannot get it right.
Im beginning to think its with the transmission and that my tune is not effecting it. Because every time i change the pressure I see no difference, or maybe its something to do with the billet servo and shift kit.
all torque management is gone
shift timings I did zero them but saw no difference
Do I enable abuse mode? Or leave it disabled

 

[11 6.2]

sounds like u have some internal peoblems to me

 

[Crazy Blu]

Its a sliding shift cause its slipping... 80e or bust!

Also i wouldnt remove all the tm on a 60e built or not built they dont last period...

 

[Samuel6731]

Its a sliding shift cause its slipping... 80e or bust!

Also i wouldnt remove all the tm on a 60e built or not built they dont last period...

It still under warranty ima bring it back see what they have to say.

Sent from my SAMSUNG-SGH-I897 using Tapatalk

 

[Peyton676]

Fairbanks .

 

[Samuel6731]

peyton....
a shift kit, sonnax servo, perf clutches and bumped shift pressures...... should be hard enough.

 

[barrrf]

Didnt you pose this same question @ GMFS a few months ago?

Someone did and I told them then that when you remove all of the TM on the tranny it will do exactly what youre talking about.