Well I got a qtp cutcutout but I need to know where the best place to weld it. I have csp lts. Was thinking right after the y but idk if that the best location. Or should it go right before the muffler. Post pics if you have any.
Let me know how you like qtp. I'm on the hunt for a good electric cutout. Everyone said dmh was the way to go so I called 3 times and left 2 messages to place an order. Never heard back. So they can suck a nut as far as I'm concerned.
about 10 inches after the y would be the best proformance wise, i know on the racecars they recommend 10 in after the collector before the muffler.
Sure will as soon as I get in welded. There also race ready e-cutouts I've heard good things bout those as well.
There's a thread here I made and I followed a few on pt.net...be sure to read them on which company to buy from.
Doing a bit of a mock up. Looks like the cutout will fit just fine where i want it. But now the issue is with the stock pipe. I have to cut about 6" or so and re-weld the flange back so it can bolt up to the flange from the LTs.
I can easily go the easy route and weld the cut out to the stock pipe, but i wanna change that out for the same ss polished like the LTs
I can easily go the easy route and weld the cut out to the stock pipe, but i wanna change that out for the same ss polished like the LTs