2014 Silverado LT fog light options???

[kevinj4891]

just picked this up the other day. my first truck. couldn't afford all the options at the time, but that wasn't a bad thing cause i am used to doing upgrades myself. i was wondering if anyone had advice on kits or how-to's to adding fog lights to this. thinking of cutting the valance, but as to mounting brackets or wiring, don't know. any help would be greatly appreciated

here's the front


and side profile (lowering it soon)

 

[Ginger]

you can try to get some LED light bars and use them for the fogs. the lower valance if the fogs are in there. you may be able to buy the factory housing and wire it yourself.

i hate adding that stuff without a factory switch.

 

[kevinj4891]

you can try to get some LED light bars and use them for the fogs. the lower valance if the fogs are in there. you may be able to buy the factory housing and wire it yourself.

i hate adding that stuff without a factory switch.

Only problem with new fog lights are they ate built in to the bumper, not just a section.thinking led's in the valance, and maybe run them to the parking lights.flip the switch to parking and have them come on.would be on full time during headlights as well, but not on during daytime running

 

[BigBoi]

How much are you lowering? I'd hate to see you put a couple hundred dollars worth of LEDs in your valence then rip it off when you a possum.

 

[Ginger]

How much are you lowering? I'd hate to see you put a couple hundred dollars worth of LEDs in your valence then rip it off when you a possum.

that is a true starement as well worry about the stance before you worry about the fogs. no one will really notice anyway, its not like the nbs and nnbs where they are easily seen

 

[kevinj4891]

doing a 2" spindle drop front, and a 3.25" drop back (shackles and removing block). not too much of a drop, but a little lower. And in Southern California, i'm more likely to hit a squirrel or cat than anything else.

 

[Ginger]

you need to go to codehs house of hackjob customs.

 

[HackMcMaster]

you need to go to codehs house of hackjob customs.

neer is closer to me
but dnw to work on new truck would probably end up buying one

 

[Ginger]

lmao

 

[David36605]

How old are you my first truck I bought my self I was 16 and it was a 76 f150
Then last year at 17 I bought a 74 c10 bought have gone under and been sold know I have my 07 and it's okay , but as fat as fog lights go do it right cause cutting corners on ur truck will only kick ur as later , so if u can wait and get new set up like u said I'm sure the have a oem housing and put ur own set of fog lights in there LEDS look best and great overall

 

[BigBoi]

How old are you my first truck I bought my self I was 16 and it was a 76 f150
Then last year at 17 I bought a 74 c10 bought have gone under and been sold know I have my 07 and it's okay , but as fat as fog lights go do it right cause cutting corners on ur truck will only kick ur as later , so if u can wait and get new set up like u said I'm sure the have a oem housing and put ur own set of fog lights in there LEDS look best and great overall

Make an intro thread. Your avatar pic intrigues me.

 

[Hunter]

Lol this can go one of two ways.....

 

[K1nG]

To an English textbook is my hopes.

 

[David36605]

Make an intro thread. Your avatar pic intrigues me.

That's my daily driver , it's a long story and I will it will be title " david36605

 

[kevinj4891]

How old are you my first truck I bought my self I was 16 and it was a 76 f150
Then last year at 17 I bought a 74 c10 bought have gone under and been sold know I have my 07 and it's okay , but as fat as fog lights go do it right cause cutting corners on ur truck will only kick ur as later , so if u can wait and get new set up like u said I'm sure the have a oem housing and put ur own set of fog lights in there LEDS look best and great overall

i am 30 yrs young. want to do things right, just don't have the money for everything i want to do. i fully modded my last car all by myself (the forum for that car was amazing. every question answered, every how-to fully detailed in pics.)

 

[David36605]

Well I'm not the most experienced but I will help you every way I can

 

[David36605]

I believe u wanted fog lights and they have oem fogs for this truck question is what do u use the truck for and what kind of roads does it go on that's important for all moss really

 

[kevinj4891]

I believe u wanted fog lights and they have oem fogs for this truck question is what do u use the truck for and what kind of roads does it go on that's important for all moss really

truck is mainly a street cruiser. like to have more light and just to have the option. was thinking of doing HID's, but i would retro fit or get aftermarket headlights first cause i'm not a jerk blinding everyone.

question about OEM fogs, wouldn't i have to get a brand new bumper as they are recessed into it, and possibly new switch inside?

 

[mike.]

New bumper and fog switch. Everything should be simple and straight forward. Aftermarket fogs look like shit in my opinion. You could possibly find someone who might trade bumpers.

 

[David36605]

Well is ur lower bumper one piece if so yes but if not if it's 3 like mine u just need to outside pieces, and as far as hid I have them and the aren't retrofited I run 55w 8k which makes a super white with little blue, maybe it's just my housings but they don't shoot out the sides like most , retrofited headlights are overpriced and mostly to much crap on them ,that's cool hope to see pic update