upgrade

newbie from houston, Tx. currently just purchased a 2014 silverado texas edition 5.3 LT. thinking of raising it 2" with 33s just to look nice. im colormatching the front and rear bumpers with handle sometime before winter is done. my question is i want to upgrade the bulbs for reverse...

So I am trying decide which route I am going to take on the exhaust for the G8. Right now I have JBA shorty headers (previous owner) into what looks to be an aftermarket mid muffler (unsure of brand-around 18" case length) at 2.5" all the way to my Solo J pipes and tips. I have a 2.5" x pipe...

03 silverado. Currently have 2 JL 12s. With a JL amp. Been thinking of building a box for 4 subs total. I can't decide with 4 12s or 2 12s and 2 10s. The 12s would be ran together and 10s together on 2 amps. If 4 12s then I'd run two amps to two subs. But trying to figure out what we be...

So, for the past couple of weeks, I'd been listening to this squeal coming from under the hood. It would get louder and louder as the truck warmed up. Well Saturday, I was coming back home and it threw the belt and overheated on me. I pulled over and the belt was over by the battery, still in...

1999 Silverado 5.3 2wd K&N filter, true duals cowboy cut exhuast (in front of the tire). 130,000 miles. No plans for it just yet

What kind of money would I realistically be looking at to put a mild cammed LQ9 or LQ4 in my truck? I will need to purchase a good running low mile engine and then the parts for the cam swap, some long tubes, and I'm sure a few other parts. Can I realistically do this for around $3500 or less...

So. Me and my buddy were talking tonight and he brought up a good point about Esky/Nali/etc gauge clusters. He's got an 03 Z71 that did not come with the towing package and doesn't have a trans cooler. If he puts in an Esky cluster, will the trans temp be able to be programmed? I know it's...

I've never seen a light bar with this done to it until I saw this, has anyone ever seen anything like this or know what it is? Would like to know about the cubes in the mirrors too. Sent from my iPhone using Tapatalk

Well, it seems the DoD lifter plague hit my car Friday night while in San Antonio, I was able to get the car back home safely yesterday. I'm not positive, but it's most likely a failing lifter. Once I have some free time I will figure it all. Noise seems to be coming from the valve cover area...

Before talking about the Sierra, I did sell the 03 Silverado 2 months ago. After 7 years of ownership, rust taking over, plus having an offer I couldn't turn down, it was time to sell. And.... A week or so later I found this one on craigslist. Went and looked at it, turned out to be...

Thinking about making a run to get some parts 03-06 steering wheel with clock spring to add steering wheel controls and doc- $150+shipping 03-06 console and dash piece- $200+ actual shipping 99-06 short overhead console- $50+ shipping NNBS DIC panel- $50+ shipping 03-06 dash bezel...

Sup ladies, West Monroe LA, you pay shipping if shipping, will drive to meet close, $800, well over a grand in parts. If you are interested, shoot me a PM Specs: Motherboard: EVGA Z68 FTW edition CPU: Intel i7-2700k Quad Core processor @ 4.0GHz CPU Cooler: Corsair H70 Core in Push/Pull with...

The other day I was doing a wheel/tire swap on the Sierra when I noticed while it was on jackstands there was a lot of lateral play when I would lift or pull on then axle shafts. Enough play to cause an audible clunk when lifted and let go. Although my axle seals have never leaked fluid, I...

...with the LEDs in the headlight. I'm looking to pull the trigger on a morimoto hid kit, 4300k 35w, for the headlights, and 4300k LEDs for the fogs. Will the morimoto kit match the LED brows in the headlights? Or at least close? I do not want 5000k as they all look blue to me. Anyone done this...

I have an extra Steering Wheel Airbag I bought for no real reason, from an 06 Trailblazer. Plug and play replacement for your OEM airbag 03-06 Trucks/SUVs. Just gives the drivers area a little different look. Color matches the stock wheel. Will include a black overlay for the gold part of the...

4 door <<<< the billet wheels I bought from my buddy. Pick them up this Saturday

Hey y'all I'm Bryson, I'm 19 from OKC and I currently have an 07 classic work truck. I found this tonight and when I bought me current truck about a year ago I really wanted the NNBS and low and behold there one. Looks beautiful on the outside to my taste. The only thing that's drawing me back...

Anybody out there swapped their stock 4l60e for a newer 4l70e or 4l80e is it even possible and is their a significant performance increase with the 4.8 v8

I'm looking to convert my mechanical fan to electric, but I'm stumped on the wiring, I have seen people make their own but not explain how. Has anybody done it that can explain it to me? Thanks in advance!

Just got a 6.0 lq4 block and getting it cleaned up what pistons do you guys recommend putting on. Will at least be spraying a 200 shot. Not looking to bore just want some better pistons to hold spray or should I not even bother changing them.