Hey everyone I'm new to the group and I'm needing a little help. I've got a 77 c10 2wd lwb and I'm going to put a 3/4 drop what size wheels and tires should I run? I was thinking 20x10 rear and 18x8 front. Anybody think something different would look good?
So those who saw my other thread and those who I've talked to in the past know how much shit dads put into his Yukon lately, rebuilt the rear end, new ac system, all new fuel lines, etc etc. All within the last year or so.
Anyways. I'm home for the weekend as my parents are moving so I was...
So it's time to pick out a set of tires. My job has discounted pricing so I'm going that route.
I have researched tire sizes and it looks like I will be going with 285/50/20. They measure out to 31.2" which is .2" taller than my current size. Truck won't go any lower for a good while and its...
2006 Sierra - TVS/Wilwood/Custom PRICe DRoP
2nd owner truck, only saw 1 winter it's whole life. Has 75000 original kilometres9 not miles). Not rust anywhere, truley one of the last clean trucks around. Nevada edition, loaded minus sunroof. Keyless entry, tow package etc
Engine
5.3 litre...
This customer wanted me to polish his paint and get the most defects out as i could as he was putting an exo-cage on this coming week. I honestly have never seen paint as hammered as this. There were tons of trail rash as you can see in the pictures. Lots of deep scratches with a lot of thin...
7" FTS Basic for a NNBS 2wd Tahoe and 22x14 XD Riots with 325/50/22 Kumho AT Tires for sale. Asking 1300 for the lift and 1200 for the wheels and tires. Nothing is wrong with the lift it was on the Tahoe for a little over a year, Wheels have some curb rash but its not real bad, one tire does...
Currently as my truck sits Im at 4/6 drop with 275/45/20, its a 07 classic Silverado rcsb. 2" Belltech spindles and dbrods 2"coilovers up front, Belltech flip kit out back with notch. I recently moved to Oklahoma City and find that the roads are rough as sh*t. Feel like the truck is getting beat...
Figured I'd start a thread on here to dump pics of the truck in. :security:
Starting with this:
2004 GMC Sierra 2500 SLT crew cab with quadrasteer (much rare) in silverbirch. 6.0 LQ4. 4L80E. 246 32 spline case. Dana 60 rear. 9.5 AAM front. Beefy enough for what I need!
February 2013 -
Bought...
4l80e
amber
auto
black
candy
car
cleaning
color matched
crew cab
gmc
grill
interior
kitchen
leveled
lift
paint
post
racing
shock
sierra
steering
tails
tires
truck
wheels
Like the title states, I have an inconsistent steering shake that I'm trying to iron out. Its not noticeable until 60+ and it just does it from time to time.
I first noticed it after installing my wheel spacers, so I took everything back off and carefully reinstalled/torqued everything down. No...
Over the next few months I will be slowly returning my 2007 Sierra Classic's suspension (and a few other things) to stock form so I can sell it and use my current wheels and tires on the '14+ Silvy. Prepping for a possible dealer trade so I'd like to have it as stock appearing as possible, the...
2011, bought it brand new with 13 miles as a leftover in April 2013. I drove it lightly until 80 or so miles, changed all fluids, then set it up on jack stands and ripped most all parts off to begin building it. Here is what all it has.
2011
2012 seal kit
280 miles
70 hours
Last 840 brute to...
Just picked up some staggered billet specialties with like new accelera iota 265/35/22s on 2 and prob switching the rears to 285/35/22 as they are 10s. I have hankook ventus with no signs of cracks on my current wheels, always garaged, only put like 10,,000 miles on them. Should I switch them...
Morn, did a 2015 ZL-1 a couple weeks back. Spent 20 hours on the polish side. It looked about 85% better when it was finished. I have never seen a dealership essentially murder a factory paint job like that ever in my life. There are some deep scratches and other things (dealer installed)...
Bought a few months ago (12/26/14). Tires and wheels both were new and have less then 500 miles on them. No damage, no rash, no bends, no punctures, no leaks
Put 22s back on and selling these. I had them on my 02 Silverado that is lowered 4/7 and recently 5/7 dropped.
Comes with chrome...
Threads for the truck are scattered around, but i decided (after seeing Sam's build thread) that i should keep a single thread chronicle of my build. i always regret not having one for hells1.
so to catch the thread up-to-date:
I purchased the truck in June of 2014.
2014 Reg Cab WT2. Cam with...
My 4runner forums suck so im going to make a thread here with my continued "build".
I figured it will be easier to make a build thread instead of blowing up random threads.
When i just purchased it.
2003 Limited 4wd v8 94,000 miles
It only took a week to take the steps...
Some of you know I snagged a 00 rcsb silverado from a local company that used it as a work truck. Bought it to use as a work/ play truck and keep the miles off the crew cab
Plans for now are to clean it up and fix all the broken things on it. Also have a 5.3L waiting on a cam and LTs to go...
Thinking about selling or trading my 20x10 Ultra Predators and 295/55/20 Nitto Trail Grapplers. I would put the tires at 70% tread. I just got a new job and will be driving a lot more for work, and don't want to run these on the highway almost every day.
I'm open to trades, hoping for...
Ok ok, I know I'm jumping the gun a little bit since I don't even have the truck yet :rofl: But I'm so freaking excited that I had to post.
Little back story of how this came about. Lisa is my second cousin and her husband (Frank) got this truck from the original owner's widow when he passed...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.