tire

  1. 04SSHD

    Big boy truck...

    I must admit, I've been a little distracted with work and personal shit recently. I did however purchase a coal rollin, diesel burning, tire thumping, petercar. I've always had a soft spot for these old 379 flat tops and this one came up for sale in Ohio so I hopped on a plane and drove it...
  2. S

    Tires, 6 year old hankooks or 2 yo accelera iota?

    Just picked up some staggered billet specialties with like new accelera iota 265/35/22s on 2 and prob switching the rears to 285/35/22 as they are 10s. I have hankook ventus with no signs of cracks on my current wheels, always garaged, only put like 10,,000 miles on them. Should I switch them...
  3. THE Mook

    New ZL1 Dealer Save

    Morn, did a 2015 ZL-1 a couple weeks back. Spent 20 hours on the polish side. It looked about 85% better when it was finished. I have never seen a dealership essentially murder a factory paint job like that ever in my life. There are some deep scratches and other things (dealer installed)...
  4. E

    89-98 Roller TBI Build

    I'm looking for some information on putting together an engine that has the roller cam and possibly Vortec heads with the TBI option to keep my truck easier to manage. Since the entire swap is coming from the 'yard I will have the complete upper intake and fuel system less the harness and PCM so...
  5. 2

    Billeh gets corrected

    So I got my hands on Billys truck for the second time today. Came in just like it did last time, contaminated n neglected. After a quick pass in the engine bay Then out came the IronX! It was bad...still had some nasty deposits after the purple shower, so I...
  6. Huck

    Huck's '70 C10

    Ok ok, I know I'm jumping the gun a little bit since I don't even have the truck yet :rofl: But I'm so freaking excited that I had to post. Little back story of how this came about. Lisa is my second cousin and her husband (Frank) got this truck from the original owner's widow when he passed...
  7. M

    Important!: Tire Size Dilemma

    Hello GM owners! I have a very simple question, however I have been unable to find a straight up answer. I have a 2011 Silverado 1500-Z71. Extended Cab 2WD. I need to upgrade the tires on the truck. I am interested in putting something bigger on the truck, but am concerned about what size...
  8. Malikk Loftis

    Malikk's 01' Step side

    Haven't been very active on here & I've been needing to make a build thread so to start it off... I Received this truck at the beginning of my sophomore year. Nothing special to a lot of people but for me, as ugly as it was I thought it was pretty cool truck with a lot of potential. I got it...
  9. bayousam

    BayouSam's Daily Build...2015 GMC Sierra Crew

    Well guys, some of you have seen on Betty's page that I picked up another sierra as a daily. I was not planning on this one as part of my pay cut due to oilfield prices was losing our company trucks, but I picked up this 2015 Sierra. The plans: 3.5" lift (yes it is 2wd but I do not plan to...
  10. nickyreno

    What PSI are you running?

    Mostly looking to see what PSI you guys with x12's are running. Mainly with 33's on 1500's. But also interested to see what people are running in general, with any setup. I was running 60 psi now I'm at 45 psi and wanting to go back. I was thinking of the chalk test to see what wears the best...
  11. GR$$N$

    20" tahoe wheels and tires

    Selling the 20s of the wifes tahoe. Good condition. 275/55r20 michelin tires. About 75% tread left. Located in southern california. Willing to ship on your dime. Lets just say 1500 obo
  12. SamCarroll

    Scion tC Detail (black)

    Finally got my hands on a friends Scion tC. Its quite haggard as you can see in the before photos. Water stains all over, never washed and just overall neglected. So i went and fixed that. He was going for 60-70% correction and I exceeded that. Im really happy with how this turned out and think...
  13. AdamsPolishes

    FAQ: Proper Microfiber Cleaning & Care

    Plush to waffle weave, glass towels to wash pads, and even more recently polishing pads, microfiber has forever changed how shine freaks keep their cars looking great and how detailers correct, protect, and care for customers cars. The argument could be made that no single advancement in the...
  14. stanced stepside01

    Wheel and tire options

    This summer i will be getting new wheels.Was wanting some chrome 20 by 14 fuel mavs then saw the pricetag so im thinking of settling with some moto metal 962s or some gear big block alloys in chrome. If anybody has any recomendations please comment and was thinkin bout getting 35 in nitto terra...
  15. Half_Ton

    I'm back

    Picked up a 1LT with leather on Saturday. I got a smoking deal and got it leveled with duratracs. tint Friday and figuring out what to do with the adaptive exhaust valve asap. I already bolted it open, but i may leave it when i splice in a magnaflow. Adding nav at a later date may be an...
  16. F

    size help

    I want to put some 22's on my dropped 01 gmc sierra (4/6) What tire size can I got with? Thanks guys and gals
  17. Bagged_Sierra

    New Sunny 275/30R24 Tires

    I have a set (4 tires) new, never been mounted that I need to sale. Decided to go with 26's so these must go. They are Sunny, size 275/30R24. Located in Tyler Texas, asking 600 obo.
  18. Fastnloud5.3

    99 to 03 bumper swap?

    what all is needed to swap an 03 sierra bumper onto my 99? just the bumper? found a bumper a buddy took off his new mud truck body donor says I can have it for a case of beer. It's complete but no brackets
  19. stanced stepside01

    lifted stepside Z

    This is the build thread of my truck this is when it was completely stock Then detrimmed/detrimmed her and put a billet grille in wasn't high enough so put on a 6-7.5 superlift kit with the dual shocks and she got a fresh detail also got some cheap ebay lights that tarnished away...
  20. Adjusted

    Passenger side header rubbing on frame rail

    It is going to be gorgeous outside the next few days and I have a free weekend so I'm going to get a few things done to the Sierra that have been building up. One of my issues is that, starting around the time I put on the 243 heads, the passenger side header rubs on the frame rail right as it...